Abstract:Polycrystalline Ni3Al-based superalloy with up to 70% <math>γ′</math> phase owns excellent strength at around 1100 °C. It has been successfully used as a substitute for turbine blade crown, which is one of the aircraft components working in the severest environment (i.e., sometimes nearly overheating). However, few studies concentrate on the coarsening resistance and phase thermal stability in this newly designed polycrystalline superalloy at the working temperature, hence, directional coarsening behavior of primary <math>γ′</math> <math>(γI′)</math> has remained restricted. This paper investigated directional coarsening behavior of <math>γI′</math> during aging treatment (1100 °C) after overheating at 1270 °C with furnace cooling (SFA), air cooling (SAA) and water cooling (SWA) respectively. It clearly showed that <math>γI′</math> grew into lamellar and gradually became irregular during the directional coarsening process. Moreover, its morphological combination mode was illustrated. Since parallel short lamellar <math>γI′</math> connected each other, long lamellar formed. When perpendicular long lamellar <math>γI′</math> connected each other, it became L-type or T-type, i.e., precursor of irregular <math>γI′</math>. The kinetics of directional coarsening regime of <math>γI′</math> was in line with the matrix-diffusion-controlled (MDC) theory according to the evaluation of <math>γI′</math> size. This was caused by higher migration of <math>γI′</math> interfaces than the diffusion of solute elements. It was also confirmed that driving force of directional coarsening mainly depended on the competition of elemental diffusion, lattice misfit distribution and <math>γ</math> channel distance.

Coarsening kinetics of γ′ phase in isothermal aged high Al content Ni–17 at.% Al alloy

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

Precipitation kinetics and morphology evolution of the Co3(Al, W) phase in a medium supersaturation Co–Al–W alloy

Linear evolution of the γ′-(Ni, Cu)3Al phase composition in Cu-based high-temperature alloys

Microstructure evolution behavior of Ni3Al (γ′) phase in eutectic γ-γ′ of Ni3Al-based alloy

Precipitation and Coarsening Kinetics of H-phase in NiTiHf High Temperature Shape Memory Alloy

Precipitation behavior of γ′ phase with a multi-model morphology in the Ni-based superalloy GH4720Li during water quenching and subsequent artificial aging and related mechanisms

Coarsening kinetics of γ′ precipitates in Ni-Al and Ni-Al-Mo alloys

Insight into the aging behavior of a novel Al-Li-Cu-Mg alloy

Coarsening Kinetics of γ′ Precipitates in Dendritic Regions of a Ni3Al Base Alloy

Phase-field simulation of early-stage kinetics evolution of γ' phase in medium supersaturation Co-Al-W alloy

The Coarsening Behavior of Γ′ Phases in Ni-Al Binary Model Single Crystal Superalloy at 1000 °C

Nano-precipitate and its aging behavior in a B2-NiAl strengthened ferritic ODS alloy

Phase Transformation and Aging Behavior of Al0.5CoCrFeNiSi0.2 High-Entropy Alloy

Microstructural Evolution and Hardness of a Heat Resistant Alloy During Long Term Aging at 700 °C

Phase-field simulation of re-dissolution of γ′ phase in Ni–Al alloy by continuous and second-order aging treatment

Precipitates Evolution During Isothermal Aging and Its Effect on Tensile Properties for an AFA Alloy Containing W and B Elements

Phase-field simulation of evolution kinetics of second γ′ phase in Ni–Al alloy under tensile stress