Abstract:Polycrystalline Ni3Al-based superalloy with up to 70% <math>γ′</math> phase owns excellent strength at around 1100 °C. It has been successfully used as a substitute for turbine blade crown, which is one of the aircraft components working in the severest environment (i.e., sometimes nearly overheating). However, few studies concentrate on the coarsening resistance and phase thermal stability in this newly designed polycrystalline superalloy at the working temperature, hence, directional coarsening behavior of primary <math>γ′</math> <math>(γI′)</math> has remained restricted. This paper investigated directional coarsening behavior of <math>γI′</math> during aging treatment (1100 °C) after overheating at 1270 °C with furnace cooling (SFA), air cooling (SAA) and water cooling (SWA) respectively. It clearly showed that <math>γI′</math> grew into lamellar and gradually became irregular during the directional coarsening process. Moreover, its morphological combination mode was illustrated. Since parallel short lamellar <math>γI′</math> connected each other, long lamellar formed. When perpendicular long lamellar <math>γI′</math> connected each other, it became L-type or T-type, i.e., precursor of irregular <math>γI′</math>. The kinetics of directional coarsening regime of <math>γI′</math> was in line with the matrix-diffusion-controlled (MDC) theory according to the evaluation of <math>γI′</math> size. This was caused by higher migration of <math>γI′</math> interfaces than the diffusion of solute elements. It was also confirmed that driving force of directional coarsening mainly depended on the competition of elemental diffusion, lattice misfit distribution and <math>γ</math> channel distance.

The Coarsening Behavior of Γ′ Phases in Ni-Al Binary Model Single Crystal Superalloy at 1000 °C

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Influence of Cooling Rate on the Formation of Bimodal Microstructures in Nickel-Base Superalloys During Continuous Two-Step Aging

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

The change of γ' phase sizes and volume fraction in a Ni-Al binary model nickel-based single-crystal alloy during the thermal exposure treatment

Coarsening Transitional Kinetics of Γ′ Precipitates in a Nickel-Based Single Crystal Superalloy During Thermal Exposure

Regular Γ/γ′ Phase Interface Instability in a Binary Model Nickel-Based Single-Crystal Alloy

Coarsening kinetics of γ′ phase in isothermal aged high Al content Ni–17 at.% Al alloy

Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

Precipitation and growth behavior of γ′ phase in Ni3Al-based superalloy under thermal exposure

Microstructural Evolution of a High W Content Ni-Based Superalloy at γ′ Sub-Solvus Temperatures

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Phase-field simulation of γʹ coarsening behavior in cobalt-based superalloy

Application of a modified Ostwald ripening theory in coarsening of γ′ phases in Ni based single crystal superalloys

Correlations Between Microstructure Evolution and Mechanical Behavior of a Nickel-Based Single Crystal Superalloy with Long-Term Aging Effects

Growth and dissolution behavior and morphology evolution of γ' precipitates in GH4742 nickel-based superalloy

Precipitate Behavior and Microstructure Evolution of Γ’ Phase in Ni-Al Alloys with the Internal Elastic Strain

Coarsening Kinetics of γ′ Precipitates in Dendritic Regions of a Ni3Al Base Alloy

Phase-field simulation of evolution kinetics of second γ′ phase in Ni–Al alloy under tensile stress

Growth behavior of γ′ phase in a powder metallurgy nickel-based superalloy under interrupted cooling process