Abstract:Alkali activated slag ultra-high performance concrete (AAS-UHPC) is a promising low-carbon cementitious material that can effectively utilize industrial solid waste and reduce pollutant emissions during the production of cementitious materials compared with ultra-high performance concrete (UHPC), and it also exhibits excellent mechanical properties. The objective of this study is to conduct a comparative experimental analysis of the workability, mechanical properties and deformation behavior of UHPC and AAS-UHPC. In this study, AAS-UHPC prepared with lower water/cement ratio (w/b) has good flowability, faster setting time and higher strength. Although the early hydration rate of AAS-UHPC was similar to that of UHPC, its cumulative heat of hydration was higher. In chemical shrinkage experiments, the shrinkage value of AAS-UHPC increased with increasing water bath temperature and remained at about twice the strain value of UHPC. The age-early drying shrinkage of AAS-UHPC can be divided into four phases: transient deformation, dormant, accelerated, and slow development. stage, accelerated stage and slow development stage. Self-shrinkage is divided into three stages: dormant stage, accelerated stage and slowly developing stage. Compared with ultra-high performance concrete, AAS-UHPC has a longer dormant phase of early age shrinkage, and the deformation in this phase is mainly plastic shrinkage. Starting from the accelerated stage, the relative humidity decreases rapidly due to the strong occurrence of hydration reaction and shrinkage of pore structure. This leads to a rapid increase in the modulus of elasticity of AAS-UHPC, which results in greater deformation. In the later stages, the rate of shrinkage development slows down due to the basic formation of the concrete skeleton.

Establishment of Drying Shrinkage Deformation Model and Ingredient Correlation Analysis of Ultra-high Performance Concrete

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Investigation of early drying shrinkage of ultrahigh-performance concrete under windy conditions

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Autogenous shrinkage prediction models and microstructure of UHPC with single or binary addition of an expansive agent and steel fibers

Empirical Compression Model of Ultra-High-Performance Concrete Considering the Effect of Cement Hydration on Particle Packing Characteristics

Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions

Drying Shrinkage Behavior of Ultra High Toughness Cementitious Composites and Its Influence on Anti-Cracking Capacity

Shrinkage Mitigation of an Ultra-High Performance Concrete Submitted to Various Mixing and Curing Conditions

Mechanical and Drying Shrinkage Performance Study of Ultra-High-Performance Concrete Prepared from Titanium Slag under Different Curing Conditions

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Effects of Type and Content of Fibers, Water-to-Cement Ratio, and Cementitious Materials on the Shrinkage and Creep of Ultra-High Performance Concrete

Experiments on drying shrinkage and creep of high performance hybrid-fiber-reinforced concrete

Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition

Comparative research: early-age deformation of alkali-activated/cement-based ultra-high performance concrete

Early-age autogenous shrinkage, tensile creep, and restrained cracking behavior of ultra-high-performance concrete incorporating polypropylene fibers

Autogenous Shrinkage, Microstructure, and Strength of Ultra-High Performance Concrete Incorporating Carbon Nanofibers

Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall: Modelling and experimental results

Influence of High Temperature Curing and Surface Humidity on the Tensile Strength of UHPC

Mechanical Properties and Shrinkage of Ultrahigh-Performance Concrete Containing Lithium Carbonate and Nano-Calcium Carbonate