Abstract:Ultra-high performance concrete (UHPC) tends to crack and flake at high temperature, which causes the structure to lose its overall stability and collapse, posing a serious threat to people's lives and property safety. In this study, by selecting the cementitious material and the high-temperature resistant aggregate, a new type of high-temperature resistant ultra-high performance concrete (HTR-UHPC) was successfully developed. The high temperature resistance tests of HTR-UHPC were systematically carried out at 5 different temperatures (20 °C, 250 °C, 500 °C, 750 °C, 1000 °C). The compressive and axial tensile properties of the specimens were investigated after high temperatures, and the compressive and tensile stress–strain curves were obtained. High-temperature products and internal structures were tested by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively, and the microscopic mechanisms were revealed. The results showed that the mechanical properties of the HTR-UHPC had been significantly improved after heating at 500 °C, 750 °C, and 1000 °C. When heated to 500 °C, the compressive and tensile strength of HTR-UHPC retained 106 and 88% of the unheated status, respectively. While the structure of traditional UHPC was damaged, the compressive and tensile strength retained only 90 and 76%. Moreover, when heated to 750 °C, the HTR-UHPC still maintained structural integrity. The residual compressive and tensile strength could still reach 115.83 and 6.17 MPa. During the hydration process, the HTR-UHPC did not generate calcium hydroxide, and the failure stress caused by high-temperature dehydration was small. At the same time, the ability of late crystal transition to reduce strength was suppressed by the addition of mineral admixtures, which enabled the formation of cracks and pores to be effectively suppressed. The stability and mechanical properties of the structure were maintained. Overall, these findings offer valuable insights into the influence of cementitious material system and high-temperature resistant aggregate on the mechanical properties of HTR-UHPC.

Spectrum of congenital heart disease detected echocardiographically in prenatal life.

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Investigation of early drying shrinkage of ultrahigh-performance concrete under windy conditions

XRD INVESTIGATIONS ON COMPRESSIVE STRENGTH GAIN OF UHPC SUBJECTED TO VARIOUS CURING TECHNIQUES

Shrinkage Mitigation of an Ultra-High Performance Concrete Submitted to Various Mixing and Curing Conditions

Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions

Influence of Rapid Heat Treatment on the Shrinkage and Strength of High-Performance Concrete

Mechanical and Drying Shrinkage Performance Study of Ultra-High-Performance Concrete Prepared from Titanium Slag under Different Curing Conditions

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Effect of curing regimes on the rheological, mechanical, hydration and microstructure of ultra-high-performance concrete (UHPC) using indigenous resources: progress towards sustainable construction practices

Study on manufacturing method of improving the strength of UHPC under natural curing conditions

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Drying Shrinkage Behavior of Ultra High Toughness Cementitious Composites and Its Influence on Anti-Cracking Capacity

The Influence of Curing System on the Macroscopic Performance and Microstructure of Anti-Abrasive UHPC

TRPM7 is required for ovarian cancer cell growth, migration and invasion.

Effect of curing regime on the strength development and microstructure evolution of high strength concrete

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

Theoretical and Experimental Research of Ultra-High-Performance Concrete Tensile Behaviour Based on Micro-Analysis

Triaxial tests on high ductile concrete under different environmental conditions

Effect of Steel Fibers on Tensile Properties of Ultra-High-Performance Concrete: A Review