Abstract:Ultra-high performance concrete (UHPC) tends to crack and flake at high temperature, which causes the structure to lose its overall stability and collapse, posing a serious threat to people's lives and property safety. In this study, by selecting the cementitious material and the high-temperature resistant aggregate, a new type of high-temperature resistant ultra-high performance concrete (HTR-UHPC) was successfully developed. The high temperature resistance tests of HTR-UHPC were systematically carried out at 5 different temperatures (20 °C, 250 °C, 500 °C, 750 °C, 1000 °C). The compressive and axial tensile properties of the specimens were investigated after high temperatures, and the compressive and tensile stress–strain curves were obtained. High-temperature products and internal structures were tested by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively, and the microscopic mechanisms were revealed. The results showed that the mechanical properties of the HTR-UHPC had been significantly improved after heating at 500 °C, 750 °C, and 1000 °C. When heated to 500 °C, the compressive and tensile strength of HTR-UHPC retained 106 and 88% of the unheated status, respectively. While the structure of traditional UHPC was damaged, the compressive and tensile strength retained only 90 and 76%. Moreover, when heated to 750 °C, the HTR-UHPC still maintained structural integrity. The residual compressive and tensile strength could still reach 115.83 and 6.17 MPa. During the hydration process, the HTR-UHPC did not generate calcium hydroxide, and the failure stress caused by high-temperature dehydration was small. At the same time, the ability of late crystal transition to reduce strength was suppressed by the addition of mineral admixtures, which enabled the formation of cracks and pores to be effectively suppressed. The stability and mechanical properties of the structure were maintained. Overall, these findings offer valuable insights into the influence of cementitious material system and high-temperature resistant aggregate on the mechanical properties of HTR-UHPC.

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

Durability of Ultra-High Performance Concrete in Tension under Cold Weather Conditions

Durability of micro-cracked UHPC subjected to coupled freeze-thaw and chloride salt attacks

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Investigation of Microstructural Damage in Ultrahigh-Performance Concrete under Freezing-Thawing Action

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Effects of Heating Followed by Water Quenching on Strength and Microstructure of Ultra-High Performance Concrete

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Experimental study on shear performance of ultra-high-performance concrete beams at elevated temperatures

Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)

Evaluation of Compressive Strength of UHPC Cured in A Winter Low-temperature

Combined Curing As a Novel Approach to Improve Resistance of Ultra-High Performance Concrete to Explosive Spalling under High Temperature and Its Mechanical Properties

Mechanical and Microstructural Properties of Ultra-High Performance Concrete with Lightweight Aggregates

Study on Frost Resistance and Interface Bonding Performance through the Integration of Recycled Brick Powder in Ultra-High-Performance Concrete for Structural Reinforcement

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams after Exposure to High Temperatures

Experimental study of the durability properties of ultra-high toughness cementitious composites under freezing and thawing cycles

Assessing durability properties of ultra-high performance concrete-class materials