Abstract:Ultra-high performance concrete (UHPC) tends to crack and flake at high temperature, which causes the structure to lose its overall stability and collapse, posing a serious threat to people's lives and property safety. In this study, by selecting the cementitious material and the high-temperature resistant aggregate, a new type of high-temperature resistant ultra-high performance concrete (HTR-UHPC) was successfully developed. The high temperature resistance tests of HTR-UHPC were systematically carried out at 5 different temperatures (20 °C, 250 °C, 500 °C, 750 °C, 1000 °C). The compressive and axial tensile properties of the specimens were investigated after high temperatures, and the compressive and tensile stress–strain curves were obtained. High-temperature products and internal structures were tested by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively, and the microscopic mechanisms were revealed. The results showed that the mechanical properties of the HTR-UHPC had been significantly improved after heating at 500 °C, 750 °C, and 1000 °C. When heated to 500 °C, the compressive and tensile strength of HTR-UHPC retained 106 and 88% of the unheated status, respectively. While the structure of traditional UHPC was damaged, the compressive and tensile strength retained only 90 and 76%. Moreover, when heated to 750 °C, the HTR-UHPC still maintained structural integrity. The residual compressive and tensile strength could still reach 115.83 and 6.17 MPa. During the hydration process, the HTR-UHPC did not generate calcium hydroxide, and the failure stress caused by high-temperature dehydration was small. At the same time, the ability of late crystal transition to reduce strength was suppressed by the addition of mineral admixtures, which enabled the formation of cracks and pores to be effectively suppressed. The stability and mechanical properties of the structure were maintained. Overall, these findings offer valuable insights into the influence of cementitious material system and high-temperature resistant aggregate on the mechanical properties of HTR-UHPC.

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Experimental study on dynamic behavior of concrete at elevated temperatures

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

Effects of Heating Followed by Water Quenching on Strength and Microstructure of Ultra-High Performance Concrete

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Experimental Research on the Degradation of Mechanical Properties and Microstructural Evolution of Ultra-High-Performance Concrete Under Fire Conditions

Influence of Aggregate Size and Inclusion of Polypropylene and Steel Fibers on the Hot Permeability of Ultra-High Performance Concrete (UHPC) at Elevated Temperature

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Combined Curing As a Novel Approach to Improve Resistance of Ultra-High Performance Concrete to Explosive Spalling under High Temperature and Its Mechanical Properties

Combined effect of natural fibre and steel fibre on the thermal-mechanical properties of UHPC subjected to high temperature

Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)

Influence of High Temperatures on the Mechanical and Microstructural Properties of Hybrid Steel-Basalt Fibers Based Ultra-High-performance Concrete (UHPC)

Effect of Aggregate Size and Inclusion of Polypropylene and Steel Fibers on Explosive Spalling and Pore Pressure in Ultra-High-performance Concrete (UHPC) at Elevated Temperature

Study on workability and mechanical strength of low cement ultra-high performance concrete with ultrafine quartz powder as alternative material under high temperature curing

Mechanical and Microstructural Properties of Ultra-High Performance Concrete with Lightweight Aggregates

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures