Abstract:A novel type of traditional composite member-unbonded prestressed I-shaped steel encased in a UHPC (PSRUHPC) beam is proposed to reduce the brittleness of UHPC beams and improve their bearing capacity. A PSRUHPC beam, an unbonded prestressed UHPC (PRUHPC) beam, and an I-shape steel UHPC (SRUHPC) beam were manufactured, and their flexural static performances were assessed using a flexural comparison test. The test results reveal that the flexural process of the PSRUHPC beam is similar to that of ordinary reinforced concrete beams, and UHPC crushing in the compression zone is a sign of failure. Due to the bridge coupling effect of steel fiber, the crushed concrete still maintains good integrity without bursting, the UHPC in the tension zone remains functional after cracking, and the cracking inflection point of the load–deflection curve was not obvious. The PSRUHPC beam showed a significantly improved bearing capacity and flexural stiffness, its load–deflection curve exhibited significantly more energy consumption, and its bending ductility performance was improved, with better deformation properties. Compared with PRUHPC beams, PSRUHPC beams show a bearing capacity increase of 55.3%, a cracking load increase of 11.9%, and a displacement ductility coefficient increase of 76.2%. Compared with SRUHPC beams, PSRUHPC beams show a 15.4% increase in bearing capacity, a 50.2% increase in cracking load, and a 12.1% increase in displacement ductility coefficient. The application of prestress can significantly improve the stiffness of the beam prior to cracking. The cracking loads of prestressed ordinary concrete beams and steel-reinforced concrete beams account for 20–30% of their ultimate loads, which value was 40–50% for the tested beams. The change trend of strain in the section steel and UHPC is roughly the same at the same height, and the strains of the two deviated after most of the section steel yielded under tension, but they can generally work together. When the tested beams were cracked, multiple cracks appeared, which were fine and dense. The magnetic flux sensor cable force-monitoring system can better monitor the strand stress increment of unbonded prestressed steel UHPC beams, where the prestressed strand did not yield tension under the final state; the load–strand stress increment curve was basically the same as the load–deflection curve, and the stress increment of the unbonded steel strand positively correlated with the midspan deflection. Finite element simulation was used to verify the test results, and we determined the reinforcement ratios for non-prestressed and prestressed reinforcement, as well as the ratio of a steel-containing section, the effective prestress, the height of prestressed reinforcement, the position and strength of I-shaped steel, and whether or not the prestressed reinforcement was bonded. The effects of these parameters on the bearing capacity and displacement ductility coefficient of PSRUHPC beams were studied. The results can provide a reference for subsequent theoretical design calculations.

Effect of high-strength and stainless steel reinforcement on the flexural behavior of UHPC beams

Flexural and cracking performance of ultra-high performance concrete beams with high-strength steel reinforcements

Experimental investigation on flexural and ductile behaviors of rebar‐reinforced ultra‐high‐performance concrete beams

Flexural behavior of ultra-high-performance concrete beams with various types of rebar

Flexural and cracking behaviors of reinforced UHPC beams with various reinforcement ratios and fiber contents

Comparative study on flexural performance of ultra‐high performance concrete beams reinforced with steel rebar and steel plate

Experimental investigation on flexural performance of UHPC beams reinforced with steel-FRP bars

Experiment and finite element analysis of bending behavior of high strength steel-UHPC composite beams

Flexural Performance of Ultrathin UHPC Slab–Steel Composite Beams with Ultrashort Stud Connections

Flexural Behavior and Design of Prestressed Ultra-High Performance Concrete (UHPC) Beams: Failure Mode and Ductility

Hybrid fibre reinforced ultra-high performance concrete beams under static and impact loads

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Experimental and Numerical Study on the Flexural Behaviors of Unbonded Prestressed I-Shaped Steel Encased in Ultra-High-Performance Concrete Beams

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Development length and bond behavior of lap-spliced reinforcement in Ultra-high performance concrete beams

Effect of Steel-Fiber Shear Reinforcement on Postcracking Shear Fatigue Behavior of Nonstirrup UHPC Beams

Flexural strengthening of reinforced concrete beams or slabs using ultra-high performance concrete (UHPC): A state of the art review

Reinforcement Effects on Tensile Behavior of Ultra-High-Performance Concrete (UHPC) with Low Steel Fiber Volume Fractions

New Energy Dissipation Mechanisms for Steel Fiber Reinforcement in Ultra High-Performance Concrete

Flexural strength of prestressed Ultra-High-Performance concrete beams

Flexural Performance of SSK Reinforced Steel–UHPC Composite Beams: Experimental and Numerical Study