Abstract:Freezing and thawing alternation is one harsh weather condition for the concrete structures serving in seasonal frozen areas. As an emerging construction material, the frost-resistance of ultra-high performance concrete (UHPC) is highly necessary to be understood for propelling its practical application. In this study, the frost-resistance of UHPC was systematically evaluated based on the mechanical properties and the cracking behaviors. The fast freezing and thawing (FT) cycles were chosen as the experiment condition, along with the water-immersion condition for comparison. A combination of destructive mechanical and non-destructive resonance frequency test was used to characterize the behaviors. The results showed that, after undergoing 300 FT cycles, the tensile initial cracking strength, the tensile strength, the flexural strength, and the compressive strength exhibited a certain of degradations. The corresponding effects of the water-immersion action were more positive. The tensile strain capacity under the FT condition almost kept constant, whereas that under the water-immersion condition decreased. The two indices (including strain and strength) could reasonably reflect the magnitude of tensile strain. The digital image correlation (DIC) analysis unveiled that there may exist an additional plastic deformation in the tensile full-field deformation, apart from the elastic deformation and crack opening. Compared with the water-immersion action, the FT action resulted in a less zigzag cracking path, shorter cracking time, and larger crack opening under flexural loading. In addition, the variations of dynamic modulus of elasticity and re-hydration reaction degree under the FT condition were not coincident with those of mechanical properties. The findings could provide some valuable references for estimating the bearing capacity of the UHPC structures served in practical engineering.

Evaluation of Compressive Strength of UHPC Cured in A Winter Low-temperature

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Effects of alternating positive and negative temperature curing on the mechanical properties of ultra-high performance concrete

Flexural fatigue behavior of ultra-high performance concrete under low temperatures

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

Investigation of Microstructural Damage in Ultrahigh-Performance Concrete under Freezing-Thawing Action

Influence of High Temperature Curing and Surface Humidity on the Tensile Strength of UHPC

Smart ultra-high-performance concrete under cyclic high compressive stress

Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology

The Time-Dependent Effect in Ultra High-Performance Concrete According to the Curing Methods

Experimental investigation on electrical response and mechanical performance of cementitious materials at low temperatures

XRD INVESTIGATIONS ON COMPRESSIVE STRENGTH GAIN OF UHPC SUBJECTED TO VARIOUS CURING TECHNIQUES

Experimental study of the durability properties of ultra-high toughness cementitious composites under freezing and thawing cycles

Analysis of the behavior of ultra high performance concrete at early age

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Application of ultra-high performance concrete for thermal resistance materials

Mechanical and Microstructural Properties of Ultra-High Performance Concrete with Lightweight Aggregates

Assessing durability properties of ultra-high performance concrete-class materials

Research on the Mechanical Properties of Concrete under Low Temperatures

Durability of micro-cracked UHPC subjected to coupled freeze-thaw and chloride salt attacks

Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling