Abstract:Ultra-high performance concrete (UHPC) has a high self-healing capacity and is prone to bursting after exposure to high temperatures due to its characteristics. This work evaluates the damage and improvement of UHPC with coarse aggregates through mechanical properties (compressive strength and ultrasonic pulse velocity), transport properties (water absorption and a chloride diffusion test), and micro-properties such as X-ray diffraction (XRD), Mercury intrusion porosimetry (MIP), and Scanning electronic microscopy (SEM). The result demonstrates that polypropylene (PP) fibers are more suitable for high temperature tests than polyacrylonitrile (PAN) fibers. The result shows that 400 °C is the critical temperature point. With the increase in temperature, the hydration becomes significant, and the internal material phase changes accordingly. Although the total pore volume increased, the percentage of various types of pores was optimized within 400 °C. The mass loss gradually increased and the ultrasonic pulse velocity gradually decreased. While the compressive strength first increased and then decreased, and the increase occurred within 25–400 °C. As for the transport properties, the chloride migration coefficient and capillary absorption coefficient both increased dramatically due to the higher sensitivity to temperature changes. The results of the property improvement test showed that at temperatures above 800 °C, the compressive strength recovered by more than 65% and the ultrasonic pulse velocity recovered by more than 75%. In terms of transport properties, compared to the results before self-healing, the chloride migration coefficient decreased by up to 59%, compared with 89% for the capillary absorption coefficient, after self-healing at 800 °C. With respect to the enhancement effect after exposure to high temperatures, the environment of a 5% Na2SO4 solution was not as good as the clean water environment. The corresponding changes in microstructure during the high temperatures and the self-healing process can explain the change in the pattern of macroscopic properties more precisely.

Smart ultra-high-performance concrete under cyclic high compressive stress

A Review of Self-Sensing Ultra-High Performance Concrete: Towards Next-Generation Smart Structural Materials

Experimental study on dynamic behavior of concrete at elevated temperatures

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Uniaxial compression performance and stress–strain constitutive model of the aluminate cement-based UHPC after high temperature

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Self-heating curing and its influence on self-sensing properties of ultra-high performance concrete with hybrid stainless steel wires and steel fibers

Evaluation of Compressive Strength of UHPC Cured in A Winter Low-temperature

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

Influence of High Temperature Curing and Surface Humidity on the Tensile Strength of UHPC

Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling

Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology

Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams after Exposure to High Temperatures

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Electromechanical response of smart ultra-high-performance concrete beams under flexure: Effects of filler type and electrode spacing

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

Flexural fatigue behavior of ultra-high performance concrete under low temperatures

Self-sensing nano-engineered ultra-high performance concrete (UHPC) under tension

Residual Compressive Strength of High-Strength Concrete Exposed to Elevated Temperatures

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures