Abstract:Ultrahigh performance concrete (UHPC) is a cement-based material with superior characteristics including tension strain-hardening and multi-cracking, which is attractive for application in the field of assembled structures. However, a reliable method for simulating the mechanical behaviour of UHPC structures is lacking. Thus, this study proposes a two-dimensional fixed crack constitutive model for UHPC using the MSC.MARC software based on the experimental results, which is expected to offer high reliability. The stirrup restraint effect, tensile strength hardening, stiffness degradation, and the tension–compression softening of UHPC were considered in the constitutive model. To calibrate the relevant parameters of the constitutive model, UHPC prism and dog-bone specimens with different steel fibre contents were fabricated. Through uniaxial compressive and tensile tests with different loading regimes, the effects of steel fibre content, maintenance mode, and the loading regime on the uniaxial mechanical properties of UHPC were analysed. The test results showed that the peak compressive strain of the specimen with 2% steel fibre content was significantly higher than those of the specimens with 1% and 3% steel fibre content. Furthermore, UHPC exhibits strain hardening and ductility in the tensile experiments. The steel fibre content and steam curing significantly improved the tensile strength of the UHPC specimens. Based on the test data, the skeleton curves and hysteresis criteria of UHPC under compression and tension were proposed, and the formulae describing the process of unloading and reloading, which can be used for the basic constitutive model of UHPC, were fitted. Finally, five UHPC shear wall specimens were designed and simulated through the proposed model. The numerical results obtained using the proposed constitutive model and modelling methodology, including the skeleton curves, failure modes, ductility, and the deformation capacity of the UHPC shear walls, agreed significantly with the experimental results, confirming the reliability and high accuracy of the proposed UHPC constitutive model, thereby increasing the applicability of UHPC.

Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall: Modelling and experimental results

Investigation of early drying shrinkage of ultrahigh-performance concrete under windy conditions

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Analysis of the behavior of ultra high performance concrete at early age

A Hygro-Thermo-Chemo Mechanical Model for the Simulation of Early Age Behavior of Ultra-High-Performance Concrete

Autogenous shrinkage prediction models and microstructure of UHPC with single or binary addition of an expansive agent and steel fibers

Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions

Experimental and Numerical Research of Ultrahigh Performance Concrete Layered Shell Element Based on a Two-Dimensional Fixed Crack Model

Age-dependent Size Effect and Fracture Characteristics of Ultra High Performance Concrete

Shrinkage Mitigation of an Ultra-High Performance Concrete Submitted to Various Mixing and Curing Conditions

Early Age Properties and Cracking Control of Concrete

Analyzing of Cracking Risk of Early-age Concrete Structure

Simulation and analysis of infilled-wall cracks' development by shrinkage using semi-discrete and whole type model

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Influence of Steel Plates and Studs on Shrinkage Behavior and Cracking Potential of High-Performance Concrete

Containment of internal expansion caused by alkali-aggregate reaction with ultra-high performance fiber reinforced concrete

Numerical investigation on early age performance of ultra-high-performance concrete shear keys between an adjacent prestressed concrete box beams

Comparative research: early-age deformation of alkali-activated/cement-based ultra-high performance concrete

Early Age Shrinkage and Mechanical Effect of Ultra-High-Performance Concrete Composite Deck: A Case Study with In Situ Test and Numerical Simulation

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES