Abstract:The bundled lipped channel-concrete (BLC-C) composite wall structure is a new structure with several advantages such as a high bearing capacity and good seismic performance. However, interface cracks between a BLC-C composite wall and the infill wall (non-structural wall) are a severe problem and need to be urgently resolved. Interface cracks affect not only the esthetics, but also the normal use of a building. The presence of interface cracks changes the perceptions of the owners of a structure, forcing them to question its safety and even take legal action against its developer. Therefore, in this study we aimed to investigate the initial cracking of the interface between a BLC-C composite wall and an infill wall. Unidirectional horizontal loading tests were conducted on two infill wall specimens constrained by BLC-C composite walls on both sides. The finite element analysis software ANSYS was used to simulate the loading process of the tests. The test results were compared to verify the accuracy of the finite element model. A finite element analysis was conducted to determine the effect of the horizontal displacement of the specimens when the interface initially cracked under different parameters such as the widths of the BLC-C composite wall, infill wall, and opening as well as the strength grade of the bricks and maximum normal contact stress. The results showed that a decrease in the width of the BLC-C composite wall or a rise in the width of the infill wall delayed the appearance of interface cracks. A large opening also delayed the occurrence of interface cracks. An enhancement in the strength grade of the bricks led to an earlier appearance of interface cracks. Interface cracks occurred later with an increase in the maximum normal contact stress between the BLC-C composite wall and the infill wall.

Simulation and analysis of infilled-wall cracks' development by shrinkage using semi-discrete and whole type model

Analysis of Initial Cracking of an Interface between a Bundled Lipped Channel-Concrete Composite Wall and an Infill Wall

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Numerical Simulation Analysis of CPB Wall Shinkage At early Ages

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Influence of constructional measurements on cracking of wall with small concrete hollow blocks

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Elasto-Plastic Analysis Of Reinforced Concrete Shear Wall With Openings Using A Macro Model

Finite Element Modeling and Analysis of Reinforced Concrete Frame Structure with Infilled Walls

Drying shrinkage crack simulation and meso-scale model of concrete repair systems

Fracture Analysis of Brittle Materials Based on Nonlinear FEM and Application in Arch Dam with Fractures

Parameter Design for Cracking Control of Reinforced Concrete Foundation Wall

Nonlinear finite element analysis of prefabricated hollow-core reinforced concrete shear walls

Shrinkage Stress in Concrete under Dry–wet Cycles: an Example with Concrete Column

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES

Evaluation of shrinkage induced cracking in early age concrete: From ring test to circular column

A COMPARATIVE STUDY FOR CONCRETE FRACTURE ANALYSIS USING SMEARED-AND DISCRETE-CRACK MODEL

FINITE ELEMENT SIMULATION ON THE ENTIRE MECHANICAL PERFORMANCE OF T-SHAPED SHORT-LEG CONCRETE SHEAR WALLS UNDER STATIC LOADING FROM ELASTIC TO COLLAPSE STAGES

Experimental and analytical studies of infill wall with sliding joints considering a door opening