Abstract:Low-temperature selective catalytic reduction (SCR) is an economical and feasible technology to effectively reduce NOx emissions from combustion sources. However, low-temperature SCR still suffers from low activity and SO2/H2O poisoning of catalysts. Here, a strategy to promote SCR activity and anti-poisoning ability was proposed through enhancing the metal–metal interaction. Ternary ferrite spinel material (CuMnFeO4) with a stronger metal–metal interaction was synthesized through incorporating Mn cations into the tetrahedral sites of CuFe2O4 spinel. CuMnFeO4 spinel mainly exists in an amorphous form and shows good SCR performance and SO2/H2O anti-poisoning ability in the temperature window of 200–350 °C. Density functional theory calculations were used to investigate the atomic-level reaction mechanism of NO reduction. Theoretical results indicate that NO and NH3 adsorptions over the CuMnFeO4 catalyst are controlled by the chemisorption mechanism. The interaction between reactants (NO and NH3) and the CuMnFeO4 surface is closely associated with the orbital hybridization of N and Fe atoms. The SCR reaction of NO with NH3 over the CuMnFeO4 catalyst is governed by a six-step process (NO → NO* → H2NNO* → HNHNO* → HNNOH* → N2* → N2), in which the first H-transfer reaction (H2NNO* → HNHNO*) presents the highest activation energy barrier of 230.84 kJ/mol and is the rate-determining step of the NH3-SCR reaction. Finally, a SCR cycle reaction scheme was proposed to understand the reaction process of NO reduction over CuMnFeO4 spinel.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02293?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02293</a>.BET surface area and average pore diameter of different catalysts (Table S1), schematic diagram of the experimental system for NO reduction (Figure S1), and crystal structure of CuMnFeO4 spinel, octahedral Cu2+ cation, tetrahedral Mn3+ cation, octahedral Fe3+ cation, and CuMnFeO4(100) surface (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02293/suppl_file/ef0c02293_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Selective Catalytic Reduction of NOx by CO over Cu(Fe)/SBA-15 Catalysts: Effects of the Metal Loading on the Catalytic Activity

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Selective catalytic reduction of nitric oxide with carbon monoxide over alumina-pellet-supported catalysts in the presence of excess oxygen

Improvement of Catalytic Activity over Cu-Fe Modified Al-Rich Beta Catalyst for the Selective Catalytic Reduction of Nox with Nh3

Selective Catalytic Reduction of NOx by CO over Doubly Promoted MeMo/Nb2O5 Catalysts (Me = Pt, Ni, or Co)

Effect of Cu loading content on the catalytic performance of Cu-USY catalysts for selective catalytic reduction of NO with NH3

Insights into the highly activity CuMgFe oxides for the selective catalytic reduction of NO by CO: Structure-activity relationships and K/SO2 poisoning mechanism

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Recent advances in NO reduction with CO over copper-based catalysts: reaction mechanisms, optimization strategies, and anti-inactivation measures

Understanding the high performance of an iron-antimony binary metal oxide catalyst in selective catalytic reduction of nitric oxide with ammonia and its tolerance of water/sulfur dioxide

Novel Promoting Effect of SO2 on the Selective Catalytic Reduction of NOx by Ammonia over Co3O4 Catalyst

Copper-based catalysts supported on novel Metal-Organic Framework MIL-125(Ti) for selective catalytic reduction of NO with CO

Recent Advances in NO Reduction with NH3 and CO Over Cu-Ce Bimetallic and Derived Catalysts

Bimetallic Cerium–copper Nanoparticles Embedded in Ordered Mesoporous Carbons As Effective Catalysts for the Selective Catalytic Reduction of NO with NH3

Modulating active sites: A-site doped ACu-CeO 2 catalyst for efficient CO-SCR of NO

The catalytic mechanisms and design strategies of noble metal catalysts for selective reduction of NOx with CO

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

Metal–Metal Interactions of Ternary Spinel for Efficient NH 3 Selective Catalytic Reduction of NO x at a Low Temperature

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Flexible monolithic Pt/CuO-Fe2O3/TiO2 catalysts integrated on Ti mesh for efficient NO removal via CO-SCR reaction

Recent Advances of Cu-Based Catalysts for NO Reduction by CO under O2-Containing Conditions