Abstract:Iron oxides supported on TiO2 catalysts show good activity in selective catalytic reduction (SCR) of NOx by ammonia. In this work, Fe-2(SO4)(3)/TiO2 and other catalysts containing iron and sulfates were prepared by the impregnation method and their activities for SCR of NOx by ammonia were investigated On Fe-2(SO4)(3)/TiO2 catalyst, NOx conversion reached 98.0% in the temperature range of 350-450 degrees C, while yielding little N2O. Characterization results showed that alpha-Fe2O3 and sulfates were mainly formed on the Fe-2(SO4)(3)/TiO2 catalyst. Iron oxide catalysts with sulfates [e.g., Fe-2(SO4)(3)/TiO2] caused more dispersed iron phase, and the sulfation effect might have mostly occurred on iron oxides but not TiO2. In contrast, Fe(NO3)(3) precursor supported on TiO2 without sulfates led to the Fe2O3 particle products, which physically connected to the surface of TiO2 and resulted in some agglomerations or heterogeneous distribution of Fe2O3 particles. In addition, sulfates played an important role in the SCR reactions, which were responsible for strong Bronsted acid sites. The SCR reaction mechanism on Fe-2(SO4)(3)/TiO2 might have taken place as follows: NH3 was adsorbed onto the surface of Fe-2(SO4)(3)/TiO2 and mainly formed NH4+ on Bronsted acid sites. NO was oxidized to NO2 by the oxygen in the reaction gas or on the iron oxide sites of the catalyst. Then, nitrates originated from NO2 were generated on Fe-2(SO4)(3)/TiO2 catalyst for NH3-SCR reaction. Finally, an active intermediate species like ammonium nitrite was formed, which eventually decomposed to gaseous nitrogen.

Understanding the high performance of an iron-antimony binary metal oxide catalyst in selective catalytic reduction of nitric oxide with ammonia and its tolerance of water/sulfur dioxide

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Excellent sulfur tolerance performance over Fe-SO4/TiO2 catalysts for NH3-SCR: Influence of sulfation and Fe-based sulfates

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3

Mechanistic Aspects of Highly Efficient FeaSbTiOx Catalysts for the NH3-SCR Reaction: Insight into the Synergistic Effect of Fe and S Species

Mechanistic Investigation into the Effect of Sulfuration on the FeW Catalysts for the Selective Catalytic Reduction of NOx with NH3.

Selective Catalytic Reduction of NOx with NH3 over Fe Modified MOF-Derived MnOx Catalyst

Insight into highly efficient FeOx catalysts for the selective catalytic reduction of NOx by NH3: Experimental and DFT study

Iron-Based Composite Oxide Catalysts Tuned by CTAB Exhibit Superior NH3–SCR Performance

Revealing the Excellent Low-Temperature Activity of the Fe1–xCexOδ-S Catalyst for NH3-SCR: Improvement of the Lattice Oxygen Mobility

Catalytic Performance, Characterization, and Mechanism Study of Fe-2(So4)(3)/Tio2 Catalyst for Selective Catalytic Reduction of Nox by Ammonia

Iron Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOxwith NH3

Modulating the Activity and SO2 Resistance of Α-Fe2o3 Catalysts for NH3-SCR of NOx Via Crystal Facet Engineering

Iron oxide-based catalysts for low-temperature selective catalytic reduction of NOx with NH3

A Novel MnOx–MoOx Codoped Iron-Based Catalyst for NH3-SCR with Superior Catalytic Activity over a Wide Temperature Range

Comprehensive understanding of the superior performance of Sm-modified Fe2O3 catalysts with regard to NO conversion and H2O/SO2 resistance in the NH3-SCR reaction

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Enhanced Performance of Iron-Cerium NO Reduction Catalysts by Sulfuric Acid Treatment: the Synergistic Effect of Surface Acidity and Redox Capacity

A Study of the Mechanism of Iron‐based Sulfate Catalyst for Selective Catalytic Reduction of NO with NH3

Fe–Mn Mixed Oxide Catalysts Synthesized by One-Step Urea-Precipitation Method for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures