Abstract:The purpose of this study is to experimentally and numerically investigate thermal and residual deformations of plastic ball grid array (PBGA) package and assembly. In the experiments, a full-field shadow moire with a sensitivity of 29.2 mum/fringe is used for measuring their real-time out-of- plane deformations (warpages) during heating and cooling conditions. The elastic moduli (Es) and coefficients of thermal expansion (CTEs) for epoxy molding compound (EMC) and organic substrate are measured in terms of temperatures by dynamic mechanical analyzer (DMA) and thermo-mechanical analyzer (TMA), respectively. And a finite element method with the input of these measured material properties is employed to numerically simulate the thermally-induced deformations of them, in order to understand the insight of mechanics. The full-field warpages of the PBGA package and assembly from shadow moire were documented during the temperature cycling (from room temperature to 220degC). It is interesting that the maximum warpages with concave shape for both the package and assembly occur at near 155degC during this thermal cycling, (rather than with convex shape at room temperature by assuming the warpage-free (or stress-free) temperature is at 175degC of molding). This issue has been resolved through the finite element analyses by cooperating with the residual strain (stress) in the EMC of the package, which is obtained by measuring the residual and thermal deformations of the detached EMC/die bi-material structure. This residual strain of the EMC maybe comes either from the chemical shrinkage of the EMC curing, or more possible stress relaxation of the EMC during the first solder reflow of attaching the solder balls. Furthermore, the thermal deformations for both the package and assembly were fully addressed by the finite element models. Both consistent results indicate that the more severe coplanarity with the value of about 275 mum at the corner of the substrate with the size of 40 times 40 times 1.7 mm occurs at near 155degC, due to the Tg and residual strains of the EMC, rather than at the room temperature. This severe coplanarity can be mitigated by lowering the residual shrinkage strain. And the warpage of the PBGA assembly coincides with the package at the temperature beyond 155degC (highly resulting from apparent creep of the solder balls), but is larger than that of the package below 155degC, due to constraint of the PCB through less-pronounced creep solder balls.

Overlay and CD uniformity variation due to wafer thermal deformation caused by EUV exposure

Possible extreme ultraviolet mask thermal deformation during exposure

A CDU Budget and Process Window Study with EUV Lithography for 3 Nm CFET Logic Processes and an Outlook for Future Generations

Understanding Etch Properties of Advanced Chemically Amplified EUV Resist

Process Window, and Process Optimization in Both Low and High Na EUV Processes for Advanced Logic Technologies Nodes

Line-Edge Roughness from Extreme Ultraviolet Lithography to Fin-Field-Effect-Transistor: Computational Study

A Study of the Advantages to the Photolithography Process Brought by the High NA EUV Exposure Tool in Advanced Logic Design Rules

Comprehensive study of the impact of TSV induced thermo-mechanical stress on 3D IC device performance

Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

Pattern deformation mitigation for EUV photoresists using wafer backside cleaning techniques

(Digital Presentation) Uniformity and Profile Improvement of Fin Etching Process at Wafer Extreme Edge for Finfet Mass Production

Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound

Critical dimension and real-time temperature control for warped wafers

Solubility Change Behavior of Fluoroalkyl Ether-Tagged Dendritic Hexaphenol under Extreme UV Exposure

Advanced Mechanical/Optical Configuration of Real-Time Moiré Interferometry for Thermal Deformation Analysis of Fan-Out Wafer Level Package

Lithography mask thermal and stress effect for the machine overlay compensation

Warpage measurement and simulation of flip-chip PBGA package under thermal loading

Theoretical Study of Extreme Ultraviolet Pellicles with Nanometer Thicknesses

Measurements of CD and sidewall profile of EUV photomask structures using CD-AFM and tilting-AFM

Analysis of warpage and reliability of very thin profile fine pitch ball grid array

Fundamentals of the reaction-diffusion process in model EUV photoresists