Abstract:Tellurium (Te) is one of the elements with highest extinction coefficient κ at the 13.5 nm extreme-ultraviolet (EUV) wavelength. It is being considered as an alternative absorber material for binary photomasks in EUV lithography. The absorber material is required to remain chemically stable during EUV exposure, at elevated temperatures up to 150 °C, during mask cleaning, and in the low hydrogen pressure environment that is present in the EUV scanner. However, Te is known to react with oxygen and hydrogen, forming less EUV absorbing TeO2 and more volatile H2Te, respectively. Since the melting temperature of Te is only 449.5 °C at normal pressure, alloying Te with a more stable metal might result in a high κ material that will remain thermally and chemically stable over a wider range of operating conditions. In this paper, the authors report on the stability assessment of metal telluride (M-Te) alloys for the EUV absorber material. They combined Te with high κ metals, noble metals, and etchable metals. High κ and noble M-Te materials are both thermally more stable than etchable M-Te, but they cannot be patterned easily for use in an EUV photomask. High κ M-Te exhibits polycrystal morphology at room temperature compared to quasiamorphous noble M-Te though both can crystallize at a higher temperature. Hydrogen stability and cleaning solution stability of M-Te materials are improved considerably compared to Te, but their higher surface reactivity cannot be completely mitigated without the addition of an inert capping layer. Furthermore, etchable M-Te alloys are easily oxidized during deposition, resulting in lower electron density and hence lower κ. Nevertheless, M-Te alloys may be a way to stabilize Te for usage as the EUV absorber material.

Possible extreme ultraviolet mask thermal deformation during exposure

Overlay and CD uniformity variation due to wafer thermal deformation caused by EUV exposure

Wet cleaning of Ta-based extreme ultraviolet photomasks at room temperature

Assessing stability of metal tellurides as alternative photomask materials for extreme ultraviolet lithography

Solubility Change Behavior of Fluoroalkyl Ether-Tagged Dendritic Hexaphenol under Extreme UV Exposure

Theoretical Study of Extreme Ultraviolet Pellicles with Nanometer Thicknesses

The refined EUV mask model

Reduction of residual stress in EUV Mo/Si multilayer mirrors with post-deposition thermal treatments

Measurements of CD and sidewall profile of EUV photomask structures using CD-AFM and tilting-AFM

Deformation control of a thermal active mirror

EUV ablation of organic polymers at a high fluence

Mask innovations on the eve of High NA EUV lithography

Experimental investigation of a high-k reticle absorber system for EUV lithography

Metrology of EUV Masks by EUV-Scatterometry and Finite Element Analysis

Platinum-based alloy absorber with improved etching properties for next-generation EUV mask

Comparative Study of the Thermal Stability of Be-Based Extreme Ultraviolet Pellicles

Design strategy of extreme ultraviolet resists

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

Study on ZrSi2 as a Candidate Material for Extreme Ultraviolet Pellicles

Process optimization for performance improvement in Mo/Si multilayers for EUV mask blanks

Effect of a Photolithography Polymer Mask's Dynamic Viscoelasticity on Microchannel Cross-Sectional Shapes of Glass Processed by Micropowder Blasting