Abstract:Multilevel inverters typically require a large number of power switches, increasing the likelihood of faults and compromising system reliability. To enhance inverter reliability, this article introduces a five-level multilevel inverter with fault-tolerant capabilities. This topology employs two DC voltage sources with four unidirectional and two bidirectional power IGBT switches. A fault-tolerant control strategy has been developed to reconfigure the topology whenever an open circuit fault occurs in a switch. To evaluate the proposed topology, a loss analysis and efficiency assessment were conducted using Piecewise Linear Electrical Circuit Simulation. The results showed 36.35 W of power loss and an efficiency of 96.49% for 1 kW of output power. The total standing voltage per unit and cost function of the proposed topology are 6 and 4.2, respectively, which are minimal compared to other fault-tolerant topologies. Furthermore, a laboratory prototype was developed using a DSPACE-1202 controller to validate the results. The voltage stress on the power devices was found to be reduced by 25–50% under various post-fault conditions compared to healthy condition. The proposed topology is able to withstand OC fault in single unidirectional switch or multiple unidirectional switches and still be able to generate 64% of the rated output rms voltage. If an OC fault occurs in any of the bidirectional switches, then the topology is fully tolerant by generating 100% of the rated output rms voltage. The reliability for the proposed topology is performed using Markov chain rule and proved that the proposed topology is superior to other topologies.

A Critical Fault-Tolerant Inverter Based on Internal Evolutionary Short-Circuit Failure Mechanism of IGBT Module

Fault Analysis and Fault-Tolerant Design for Parallel Redundant Inverter Systems in Case of IGBT Short-Circuit Failures

A fault-tolerant T-type three-level inverter system

Fault Analysis and Fault-tolerant Design for Parallel Redundant Inverter Systems

Fault Analysis on Conventional Parallel Inverter Systems

A Redundant Unit to Form T-Type Three-Level Inverters Tolerant of IGBT Open-Circuit Faults in Multiple Legs

Ensuring a Reliable Operation of Two-Level IGBT-Based Power Converters: A Review of Monitoring and Fault-Tolerant Approaches

Study of Accelerated Power Cycling Test of IGBT Power Modules

A Single-Phase Multilevel Inverter Topology with Fault Tolerant Capability for Single and Multiple Switch Failures

In Situ Diagnosis for IGBT Chip Failure in Multichip IGBT Modules Based on a Newly Defined Characteristic Parameter Low-Sensitive to Operation Conditions

Modified Impedance-Source Inverter with Continuous Input Currents and Fault-Tolerant Operations

Recovering Partial Three-Level Operation in a T-Type Inverter with Fault Management Redundant Unit

Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

The Fault Detection, Localization, and Tolerant Operation of Modular Multilevel Converters with an Insulated Gate Bipolar Transistor (IGBT) Open Circuit Fault

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

LF-OCT Based Non Destructive Testing for IGBT Module

A failure mechanism of IGBT module in MMC and improvement

Operating Principles of Series-Connected IGBTs Based on Active Clamping Circuit in Voltage Source Converters