Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Effect of Current spreading layer on Internal Quantum Efficiency and Optical power of Flip chip Gallium Nitride LEDs with circular contacts

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Current Spreading in Gan-Based Light-Emitting Diodes

Junction temperature and reliability of high-power flip-chip light emitting diodes

Exploring an InGaN Micro-LED structure for optimum IQE operating on low current condition through simulation study

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Effect of ITO Interface Modulation Layer on the Performances of LEDs with Ga-doped ZnO Electrode

Thermal Management for Microscale Inorganic Light-Emitting Diodes

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Enhancement of Light Extraction of GaN Light-Emitting Diode Using Opals Layer

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Study of a GaN/InGaN-based Light Emitting Diode with an Indium Gallium Oxide Current Blocking Layer, Silver Nanoparticles, and a Gallium Oxide Surface Passivation Layer

An Improved Carrier Rate Model To Evaluate Internal Quantum Efficiency And Analyze Efficiency Droop Origin Of Ingan Based Light-Emitting Diodes

Size-Dependent Quantum Efficiency of Flip-Chip Light-Emitting Diodes at High Current Injection Conditions

Numerical Simulation on Electrical-Thermal Properties of Gallium-Nitride-Based Light-Emitting Diodes Embedded in Board

Designs of InGaN Micro-LED Structure for Improving Quantum Efficiency at Low Current Density

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

Effects of Interfaces and Current Spreading on the Thermal Transport of Micro-Leds for Ka-Per-square-cm Current Injection Levels

Effect of Current on the Inhomogeneous Light Emission From AlGaInP-Based Flip-Chip Red Mini-LEDs

Enhanced performance of GaN-based ultraviolet light emitting diodes with ITO/graphene/ITO transparent conductive layer

Influence Of Indium-Tin-Oxide Thin-Film Quality On Reverse Leakage Current Of Indium-Tin-Oxide/N-Gan Schottky Contacts