Abstract:Effective thermal management is crucial for light-emitting diodes (LED). Thermoelectric cooler (TEC) and microchannel heat sink (MHS) have been demonstrated to be effective for thermal management of LED. However, neither the combination of these two methods, nor the dominant factors which could be effectively adjusted to control the LED temperature, have been reported. In this study, a cooling device integrating TEC and water-cooled microchannel heat sink (WMHS) is proposed to improve the thermal management of high-power LED headlights. The start-up performance of the proposed device, LED + TEC + WMHS, was evaluated and compared with three different systems, namely LED + WMHS, LED + AHS (air-cooled heat sink), and LED + TEC + AHS. Experimental results have demonstrated the best performance of the LED + TEC + WMHS device. Orthogonal experiments based on the Taguchi method were conducted to reveal dominant factors among four variables, including TEC current, water inlet temperature, water flow velocity, and ambient temperature. The results show that effects of all the factors were significant while the TEC current has most important influence on the performance. The variation of the thermal management performance with the levels of the factors were investigated. The LED temperature was only 60.0 degrees C even at severe working conditions (T-a = 80 degrees C, T-i = 55 degrees C) and moderate cooling input (I-TEC = 2 A, u = 0.49 m/s), indicating great thermal management performance of the proposed method. Choosing a cooling system and adjusting the factor levels for different applications were recommended.

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Thermal Properties of Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Thermal Design of Rectangular Microscale Inorganic Light-Emitting Diodes

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Analytical investigations on the thermal properties of microscale inorganic light-emitting diodes on an orthotropic substrate

3D Thermal Analysis of Rectangular Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Thermal Analysis of Injectable, Cellular-Scale Optoelectronics with Pulsed Power

Thermal Management of Micro-Scale Inorganic Light-Emittng Diodes on an Orthotropic Substrate for Biointegrated Applications

Three-dimensional thermal analysis of rectangular micro-scale inorganic light-emitting diodes integrated with human skin

Three-dimensional Thermal Analysis of Wirelessly Powered Light-Emitting Systems

Thermal Analysis and Design of High-Power LED Street Light

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

Thermal Design Based on Thermosyphon Heat Sink of High-Power LED Street Light

Recent Advances on Thermal Management of Flexible Inorganic Electronics

Light‐Emitting Diodes: High‐Efficiency, Microscale GaN Light‐Emitting Diodes and Their Thermal Properties on Unusual Substrates (small 11/2012)

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Modelling Charge Transport and Electro-Optical Characteristics of Quantum Dot Light-Emitting Diodes

2-D Photo-Thermal Distribution and Structures of Flip-Chip Mini Light-Emitting Diodes by Microscopic Hyperspectral Imaging

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2