A 6‐to‐38Gb/s capture‐range bang‐bang clock and data recovery circuit with deliberate‐current‐mismatch frequency detection and interpolation‐based multiphase clock generation

Lin Wang,Yong Chen,Chaowei Yang,Xionghui Zhou,Mei Han,Crovetti Paolo Stefano,Pui‐In Mak,Rui P. Martins

DOI: https://doi.org/10.1002/cta.3535

IF: 2.378

2023-01-05

International Journal of Circuit Theory and Applications

Abstract:We present a bang‐bang clock and data recovery circuit (BBCDR) with an ultra‐wide capture range and good energy efficiency. The circuit exhibits automatic frequency capture and phase locking over a 6‐to‐38 Gb/s wide range without using a frequency detector, allowed by a recently proposed deliberate‐current‐mismatch technique. Moreover, we accurately obtain an eight‐phase clock through analog interpolation of quadrature signals over the whole wide frequency range by introducing a tunable capacitor array before an inverter‐based phase interpolator. Summary This paper reports a bang‐bang clock and data recovery circuit (BBCDR) with an ultra‐wide capture range. The circuit exhibits automatic frequency capture and phase locking over a wide 6‐to‐38 Gb/s range without using a frequency detector, allowed by a recently proposed deliberate‐current‐mismatch technique. Moreover, we accurately obtain an eight‐phase clock through analog interpolation of quadrature signals over the whole wide frequency range by introducing a tunable capacitor array before an inverter‐based phase interpolator. A 65‐nm prototype of the developed BBCDR occupies an area of 0.07 mm2 and attains a bit error rate of less than 10−12 under a continuously variable input frequency, with a total power consumption of 24.6 mW for a 32‐Gb/s non‐return‐zero input, thus leading to 0.769‐pJ/bit energy efficiency.

engineering, electrical & electronic

What problem does this paper attempt to address?

A 6‐to‐38Gb/s capture‐range bang‐bang clock and data recovery circuit with deliberate‐current‐mismatch frequency detection and interpolation‐based multiphase clock generation

A Sub-0.25-pJ/bit 47.6-to-58.8-Gb/s Reference-Less FD-Less Single-Loop PAM-4 Bang-Bang CDR With a Deliberate-Current-Mismatch Frequency Acquisition Technique in 28-nm CMOS

A 0.14-to-0.29-pJ/bit 14-GBaud/s Trimodal (NRZ/PAM-4/PAM-8) Half-Rate Bang-Bang Clock and Data Recovery (BBCDR) Circuit in 28-nm CMOS

10 Gb/s Linear Full-Rate CMOS Phase Detector for Clock Data Recovery Circuit

A 4-to-10.5 Gb/s Continuous-Rate Digital Clock and Data Recovery With Automatic Frequency Acquisition

180.5mbps-8gbps Dll-Based Clock And Data Recovery Circuit With Low Jitter Performance

Non-Sequential Linear Cmos Phase Detector for Cdr Applications

A 0.7-pJ/b 12.5-Gb/s Reference-Less Subsampling Clock and Data Recovery Circuit

A Power Scalable 2-10 Gb/s PI-based Clock Data Recovery for Multilane Applications.

A 16-Gb/s Baud-Rate CDR Circuit With One-Tap Speculative DFE and Wide Frequency Capture Range

A 4–20-Gb/s 1.87-pJ/b Continuous-Rate Digital CDR Circuit With Unlimited Frequency Acquisition Capability in 65-nm CMOS

A 10gbps Half-Rate Digital Clock and Data Recovery Circuit for 60ghz Receiver in 65nm CMOS

A New Architecture High Speed Clock and Data Recovery Circuit

A 6.25Gb/s CMOS clock and data recovery DLL with anti-harmonic lock

A 1.25-8.5 Gb/s Wide Range CDR with Locking Detector in 40 Nm CMOS Technology

A 25gbps, 2X-Oversampling Cdr Using A Zero-Crossing Linearizing Phase Detector

A 0.32–2.7 Gb/s Reference-Less Continuous-Rate Clock and Data Recovery Circuit With Unrestricted and Fast Frequency Acquisition

A 32-Gb/s 0.46-pJ/bit PAM4 CDR Using a Quarter-Rate Linear Phase Detector and a Self-Biased PLL-Based Multiphase Clock Generator

Design and Implementation of a Rapid Synchronous Clock and Data Recovery Circuit

Delay‐locked Loop Based Clock and Data Recovery with Wide Operating Range and Low Jitter in a 65‐nm CMOS Process