Abstract:The oil‐immersed transformer is a crucial power equipment in power system, which is prone to abnormality or failure under long running. In order to improve the level of operation and maintenance and ensure the safe and reliable operation of the power grid, it is necessary to diagnose the fault of the oil‐immersed transformer in time. Most of the traditional fault vibration methods are off‐line detection, and are easily disturbed by mechanical deterioration. In order to solve the above problems, this paper established a 3D electromagnetic and stress coupling simulation model of oil‐immersed transformer by finite element simulation software. The vibration characteristics of oil‐immersed transformer core winding are obtained, and at the same time, this paper obtained the vibration signals at different positions on transformer core winding and oil tank. According to the vibration signal of the transformer, the best measuring point position of the tank wall is proposed to accurately reflect the vibration characteristics of the transformer. The signal data is preprocessed by CEEMDAN decomposition method, and the signal data is classified by GWO‐BP composite classification algorithm. This paper proposed an online transformer fault diagnosis method based on vibration signal, which achieves the purpose of accurately diagnosing oil‐immersed transformer faults. The test results show that in the case of oil‐immersed transformers the accuracy of the proposed transformer fault diagnosis method is more than 93%, which provides important guiding significance for the safe and stable operation of the transformer. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC.

Analysis and Research on the Reasons for the Increase of Com ponents in 500kV Transformer Oil

Analysis and Research of 500kV Transformer Oil Chromatographic Anomaly

Research on Deterioration Mechanism of Oil-paper Insulation of 220 Kv Current Transformer

Analysis of Abnormal Detection Data of Dissolved Gases in 500kV Transformer Oil

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

Research on 500kV Transformer on-load Tap Changer Fault Treatment and Physical Properties Testing

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Fault Analysis and Treatment of Partial Discharge in 500 kV Transformer

Simulation and Analysis of Transformer Oil Interface Discharge under DC Voltage

Causes of transformer failures and diagnostic methods – A review

Probe into a fault cause of 220kV current transformer

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Partial Discharge Initiating Process of Transformer Oil under Combined AC and DC Voltage

Development of an Online Detection Setup for Dissolved Gas in Transformer Insulating Oil

Research on Vibration Characteristic Analysis and Fault Diagnosis Method of Oil‐Immersed Transformer Based on Multi‐Physics Coupling

Transformer Oil Quality Evaluation Using Quantitative Phase Microscopy.

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

A critical review of plant-based insulating fluids for transformer: 30-year development

Analysis and enhancement of high voltage insulation for planar transformer

Analysis and Research on Abnormal Causes of Lightning Impulse Test of 500kv Transformer

Research Progress of the Dissolved Gas Analysis in Synthetic Ester Insulating Oil under Electrical Faults