Abstract:In recent years, many unplanned hazard failures of oil-filled electrical transformers have been reported due to presence of corrosion in form of semi-conductor Copper Sulphide (Cu2S) which result in formation Corrosive Sulphur Deposition (CSD) on the significant internal components. Formation of CSD leads to a continuous current path lead to overheating fault and deterioration of insulation system which can turn towards transformer failure. The purpose of this study is to establish an efficient maintenance plan of corrosion based on relevant Condition Monitoring (CM) to reduce the transformer failures. In this paper, many investigations have been reviewed to get sufficient data to understand and describe currently applied CM for diagnose the corrosion inside the transformers. The problem addressed is: is the currently applied CM relevant for early and definitely detection of the corrosion to reduce the probability of failures? The major result is the described gaps between the currently applied CM and selection of relevant CM suggested for providing definitely indication of corrosion. The currently CM implies two techniques; oil analysis based only on evaluation the quality of the oil against corrosion and electrical testing based on the variation of electrical properties of the transformer which can be occurred due to corrosion process as well as other faults. Conclusion of this review is a need to develop a relevant CM of corrosion for establishing a dynamic cost-effective Condition Based Maintenance (CBM) to prevent unplanned hazard failures at early stage which can reduce the negative impacts such as industries economic loss and hazard effect on manpower life as well as environment.

Causes of transformer failures and diagnostic methods – A review

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Investigation of Failure of High Voltage Bushing at Power Transformer

Review of condition assessment of power transformers in service

Review of Detection Methods for Typical Faults in Transformer Bushings*

Failure causes and operational life of measuring transformers installed in 150 kV and 400 kV transmission network

Large-Power Transformers: Time Now for Addressing Their Monitoring and Failure Investigation Techniques

A Reviewed Turn at of Methods for Determining the Type of Fault in Power Transformers Based on Dissolved Gas Analysis

A Review Study of Condition Monitoring and Maintenance Approaches for Diagnosis Corrosive Sulphur Deposition in Oil-Filled Electrical Transformers

Review of Various Sensor Technologies in Monitoring the Condition of Power Transformers

Types and Mechanisms of Condenser Transformer Bushing Failures

Oil-Immersed Power Transformer Condition Monitoring Methodologies: A Review

A New Condition Assessment Method for Distribution Transformers Based on Operation Data and Record Text Mining Technique

Failure analysis of dry-type power transformer

Evolution of graphical methods for the identification of insulation faults in oil-immersed power transformers: A review

Comparative analysis of the characteristics of outlet short circuit and winding insulation fault of distribution transformer and its preventive measures

A Methodology to Diagnose Transformer Faults Based on the Multi-Objective Optimization and the Case-Based Reasoning

Fault Analysis and Treatment of Partial Discharge in 500 kV Transformer

Research review on Transformer Fire Protection Technology

Investigation of the Role of Void Sizes for Failure of High Voltage Bushing

Artificial Intelligence for Diagnosing Power Transformer Faults