Abstract:Image-based simulation of complex materials is a very important tool for understanding their mechanical behaviour and an effective tool for successful design of composite materials. Asphalt concrete (AC) as one of these multi-phase complex materials is a composite of asphalt binder, air voids, and mineral aggregate particles. Simulation of AC with numerical methods is not a new topic but is faced with many challenges. In addition to requiring tremendous computational cost, it is not clear yet how to effectively model the aggregate-to-aggregate contact behaviour during loading and deformation. In this paper, an image-based multi-scale modelling is introduced to reduce the computational cost significantly by reducing the amount of elements in the numerical model. In this approach, the “up-scaling” and homogenisation of each scale to the next is critically designed to improve accuracy. In addition to this multi-scale efficiency, this study introduces an approach for consideration of particle contacts at each of the scales in which mineral particles exist. The finite-element (FE) analysis is performed in the study at four scales, namely asphalt binder, mastic, mortar, and asphalt mixture scales. The well-known FE software ABAQUS is used to conduct FE simulations at all scales. The inputs are based on the experimentally derived measurements for the binder viscoelastic properties from which the binder constitutive model is implemented into the software via the user material subroutine. For the scales of mastic and mortar, the two-dimensional (2D) images of mastic and mortar scales were generated artificially and used to characterise the properties of those scales. Finally, the 2D scanned images of asphalt mixtures after elimination of fine aggregate particles are used to study the asphalt mixture behaviour under uniaxial creep and recovery loading. Comparison between experimental results and the results from the model shows that the model developed in this study is capable of predicting the effect of asphalt binder properties and aggregate micro-structure on mechanical behaviour of AC under repeated creep loading.

Numerical modeling of multilayer asphalt-concrete roads based on the finite element method

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Model of multiple-layer pavement structure-subsoil system

NUMERICAL CALCULATION OF STRENGTH AND SHEAR RESISTANCE OF NON-RIGID ROAD PAVEMENT BY THE FINITE ELEMENT METHOD

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Application of Digital Image Processing Technique to Simulate the Macro-Mechanical Behavior of Asphalt Concrete

Towards asphalt concrete modeling by the multiscale finite element method

Experimental evaluation and theoretical analysis of multi-layered road cumulative deformation under dynamic loads

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures

Multi-scale Computational Approaches for Asphalt Pavements under Rolling Tire Load

Numerical Simulation of Asphalt Compaction and Asphalt Performance

A finite-element and Newton-Raphson method for inverse computing multilayer moduli

Analytical solution of multilayered structures with Green's function

Prediction on Dynamic Modulus of Asphalt Concrete with Random Aggregate Modeling Methods and Virtual Physics Engine

Dynamic analysis of semi-rigid asphalt pavement subjected to simulant dynamic loads

Development of an image-based multi-scale finite-element approach to predict mechanical response of asphalt mixtures