Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Model of multiple-layer pavement structure-subsoil system

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

A Double-Layered Model for Highway Subgrade and Its Dynamic Response Due to Traffic Loads

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Numerical modeling of multilayer asphalt-concrete roads based on the finite element method

Experimental evaluation and theoretical analysis of multi-layered road cumulative deformation under dynamic loads

A Finite Element Model for Simulating Stress Responses of Permeable Road Pavement

Dynamic response of a multi-layered pavement structure with subgrade modulus varying with depth subjected to a moving load

Modeling and validation of impact forces for back‐calculation of pavement surface moduli

Dynamic Response of A Pavement-Subgrade-Soft Ground System Subjected to Moving Traffic Load

Laboratory model experiments on dynamic behavior of road structures under repeated traffic loads

Analytical Calculations for Asphalt Pavement Considering Interlayer Performance

Mathematical Modeling of a Corrugated Geogrid and Geocell Reinforced Flexible Pavement Base with Interlayer Shear Performance Analysis

Parametric Analysis of Flexible Pavement Layers’ Accumulating Deflections

Pavement Mechanics Calculation Based on the Analytical Solution of Layered Viscoelastic System under Horizontal and Vertical Loads

Decision-Making for Typical Pavement Structure Based on Life-Cycle Economic Evaluation and Key Performance Indicators