Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Analytical solution of multilayered structures with Green's function

Thermal responses of layered pavement system with unsteady heat conduction

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

A Double-Layered Model for Highway Subgrade and Its Dynamic Response Due to Traffic Loads

Three-dimensional Semi-Analytical Solutions for the Transient Response of Functionally Graded Material Cylindrical Panels with Various Boundary Conditions

Analytical solution based on state-space method for cracked concrete pavement subjected to arbitrary concentrated loading

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Fast Calculation Method for Mechanical Response at the Surface of Asphalt Pavement under an Elliptical Load

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

A quasi-three dimensional multi-level Green's function interpolation method for multilayered structures

Elastoplastic Analysis of Asphalt Concrete Pavement

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Analytical Solution for the Mechanical Responses of Transversely Isotropic Viscoelastic Multi-Layered Asphalt Pavement Subjected to Moving Harmonic Load

Analytical Calculations for Asphalt Pavement Considering Interlayer Performance

Pavement Mechanics Calculation Based on the Analytical Solution of Layered Viscoelastic System under Horizontal and Vertical Loads

Wave Propagation Approach for Elastic Transient Responses of Transversely Isotropic Asphalt Pavement under an Impact Load: A Semianalytical Solution

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Analytical Solutions of Asphalt Pavement Responses under Moving Loads with Arbitrary Non-Uniform Tire Contact Pressure and Irregular Tire Imprint

Dynamic response of a multi-layered pavement structure with subgrade modulus varying with depth subjected to a moving load

3D Dynamic Analysis of a Pavement Plate Resting on a Transversely Isotropic Multilayered Foundation Due to a Moving Load