Abstract:The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM software, developed based on linear elastic and Burger's viscoelastic constitutive equations. The macroscale parameters of asphalt mortar were characterized using the nonlinear regression analysis of master curves obtained from Dynamic Shear Rheometer (DSR) tests. The verification process of EVCM successfully indicated that the computations trends fall within the range of expected values for the typical asphalt mixture material. Further, a Superpave Gyratory Compaction (SGC) test was carried out and the obtained sample was scanned using X-ray Computed Tomography (X-ray CT) to capture the air void distributions. The DEM was utilized where digital samples were established to simulate the overall process of laboratory and field compaction. The simulation results showed that the model provided a comparable prediction of responses and demonstrated the capability of SGC to fabricate a representative sample. The influence of temperature on the asphalt compaction process was explored and the results implied that temperature decreasing adversely affects the compactability and dramatically increases the demanded compaction efforts which are consistent with the law of viscoelasticity. On the contrary, when the temperature is high, the asphalt binder becomes too fluid and roller loads will simply displace, or "shove" the mat rather than compact it. Tracking the change in the air voids proportion indicates that the motion of aggregates is rather compound. The aggregates flowed vertically downwards in line with the compacting orientation while moved horizontally outwards away from the center. The results demonstrated that the model effectively simulated the compaction process, the developed model, and can be considered as a useful tool. All in all, the findings confirm that the concept is technically practicable, affording the model a tremendous potential to help researchers understand the microstructural phases of asphalt mixture during the compaction.

Prediction on Dynamic Modulus of Asphalt Concrete with Random Aggregate Modeling Methods and Virtual Physics Engine

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Comparative Modelling of Indirect Tensile Strength of Asphalt Mixtures with and Without Considering Air Void Characteristics

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

Steady-state Dynamic Method: an Efficient and Effective Way to Predict Dynamic Modulus of Asphalt Concrete

An efficient model for predicting the dynamic performance of fine aggregate matrix

Numerical Simulation of Asphalt Compaction and Asphalt Performance

Elastic Modulus Prediction of Asphalt Concrete Based on Fast Multipole Boundary Element Method

Application of Digital Image Processing Technique to Simulate the Macro-Mechanical Behavior of Asphalt Concrete

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Micromechanical simulation of porous asphalt mixture compaction using discrete element method (DEM)

A novel strategy for generating mesoscale asphalt concrete model with controllable aggregate morphology and packing structure