Abstract:Asphalt pavements suffer from field aging that accelerates distresses and reduces service life of pavements under the complex in-service environment. The majority of the current methods to study aging are performed in an indirect manner, designed in the laboratory to simulate the field. This study targets the field pavement aging directly and aims at characterising and predicting field aging using the kinetics-based modelling, which contains the field mixture moduli and field aging temperatures. The Falling Weight Deflectometer (FWD) data from the Long-Term Pavement Performance (LTPP) database are employed to provide the field moduli of asphalt mixtures over a long aging period. A pavement temperature model that considers solar radiation, air temperature and wind speed is utilised to determine the temperature fluctuations over the entire aging period and then appropriate field aging temperatures. Eight pavement sections from the four different climate zones are selected and the modulus, temperature, mixture property and climate data are collected. For each pavement section, the rheological properties are first determined to characterise the temperature-dependency of field asphalt mixtures. Then based on the kinetics-based aging prediction models for asphalt pavements, the aging properties are determined to characterise and predict aging of field asphalt mixtures. In the determination of aging properties, it is critical to divide the modulus vs. aging time curve into different segments according to the features of the constant-rate period and fast-rate period. The proposed approaches are validated by comparing the predicted moduli at specified ages to the field measurements by the FWD. It is expected that with more calibration and validation work accomplished in the future, the number of FWD measurements required for nondestructive evaluations could be reduced with the aid of the approaches proposed in this study.

Elastic Modulus Prediction of Asphalt Concrete Based on Fast Multipole Boundary Element Method

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Prediction of Viscoelastic Behavior in Asphalt Concrete Using the Fast Multipole Boundary Element Method

Application of Digital Image Processing Technique to Simulate the Macro-Mechanical Behavior of Asphalt Concrete

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Fast Calculation Method for Mechanical Response at the Surface of Asphalt Pavement under an Elliptical Load

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Prediction on Dynamic Modulus of Asphalt Concrete with Random Aggregate Modeling Methods and Virtual Physics Engine

An efficient model for predicting the dynamic performance of fine aggregate matrix

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Elastic Modulus Prediction of Asphalt Concrete Based on Composite Material Micromechanics Model

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Elastoplastic Analysis of Asphalt Concrete Pavement

Prediction of Field Aging Gradient in Asphalt Pavements

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Kinetics-based Aging Prediction of Asphalt Mixtures Using Field Deflection Data

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation