Abstract:In order to reduce vehicle vibration and improve vehicle ride comfort and handling stability, a nonlinear energy sink inerter (NESI) is designed by combing an inerter and nonlinear energy sink (NES) for use in the seat suspension and vehicle suspension for the half-vehicle-seat (HVS) system; furthermore, a model-free adaptive control (MFAC) method based on the genetic algorithm is proposed to enhance the dynamic performance of the passive HVS system. The dynamic model of the active HVS system coupled with NESI using the MFAC method is established; its dynamic responses under pavement random and shock excitations are acquired using the numerical method and the dynamic performance is evaluated by seven evaluation indicators. The efficacy of the MFAC method is demonstrated through comparative analysis with the original passive HVS system, the HVS system coupled with NESI, and the active HVS system coupled with NESI using the proportional integral derivative (PID) control method. In addition, the influence of the installed position of MFAC on the dynamic performance of the active HVS system coupled with NESI is examined. The results show that for the active HVS system coupled with NESI using the MFAC method, compared with the other three HVS systems, the root mean square (RMS) values of the vehicle body vertical acceleration, vehicle body pitch acceleration, seat vertical acceleration, and front and rear suspension dynamic travel under pavement random excitation are smaller, the corresponding peak amplitudes under pavement shock excitation reduce, and the vibration attenuation time shortens; the RMS values of the front and rear dynamic tire loading under pavement random excitation are slightly smaller, the corresponding peak amplitudes under pavement shock excitation increase, and the vibration attenuation time decreases, which reflects the best dynamic performance among the four HVS systems and shows the effectiveness of the MFAC method. Furthermore, the control effect of the MFAC method is the best when it acts both on the seat and vehicle suspensions.

Active vibration reductions for airframe and human body of UH-60A helicopter in low- and high-speed flights

Model-Free Adaptive Control of an Active Half-Vehicle-Seat System Coupled with a Nonlinear Energy Sink Inerter (NESI)

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Simultaneous Vibration Reduction and Performance Improvement of Helicopter Rotor Using Individual Blade Pitch Control with Multiple Harmonic Inputs

Feasibility and Effectiveness of a Higher Harmonic Control System for a Medium Utility Helicopter

Individual Blade Control Approach for Active Vibration Suppression of a Lift-Offset Coaxial Rotorcraft

Development and Flight Demonstration of an Active Seat Mount System for Aircrew Whole-Body Vibration Mitigation on NRC Bell-412 Helicopter

Experimental investigations on active control of multifrequency helicopter vibrations using discrete model predictive sliding mode control

Active and Passive Helicopter Noise Reduction Using the AVINOR/HELINOIR Code Suite

Active Noise Control Using a Body-Mounted Vibration Actuator to Enhance the Interior Sound of Vehicle

Multibody dynamics analysis of the human upper body for rotorcraft–pilot interaction

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

THE DYNAMIC BEHAVIOUR ANALYSIS OF HELICOPTER UNDER DYNAMIC LOAD

An excellent harmonic feedforward-sliding mode output feedback hybrid algorithm for helicopter active vibration control

Design and test of adaptive torsional vibration suppression method for helicopter power system with variable rotor speed

Enhancing Human Comfort in eVTOL Aircraft Assisted by Control Moment Gyroscopes

Vibration Behaviour Control of a Fabricated One-Passenger Electric Vehicle with Either Mechanical or Air Suspension

Application of hybrid control algorithm on the vehicle active suspension system to reduce vibrations

Individual Blade Control for Component Load Alleviation Using Higher-Order Linear Time-Invariant Models

Development of a High-Performance Low-Weight Hydraulic Damper for Active Vibration Control of the Main Rotor on Helicopters—Part 1: Design and Mathematical Model

The double-delay reducing vibration control for five-degree-of-freedom half-vehicle model in idle condition