Abstract:Low-frequency vibration and blade track spread caused by non-uniform mass and aerodynamic distributions in the main rotor system may affect pilot’s health and shorten the life span of helicopter components. To eliminate these hazards, the manual passive maintenance procedure on the ground is adopted, but it is typically complex, time-consuming, and expensive; and the other existing active control algorithms do not simultaneously minimize the once-per-revolution (1/rev) vibration and blade track spread with complicated parameter tuning. In this work, a constrained optimal tuning (COT) method, is proposed to suppress both rotor 1/rev vibration and blade track spread utilizing pitch rod lengths as the control inputs. The COT method defines a constrained vibration control formulation, and it takes the track and the stroke range of pitch rods as a control constraint to ensure that the track spread is within specification and that the control inputs have no effect on the rotor’s performance. Moreover, the optimality and stability of the COT are mathematically proven. The numerical simulations about non-uniform rotor were performed successfully utilizing the established main rotor dynamic model. The results show that the 1/rev vibration in the X, Y, and Z directions can all be decreased by more than 90 %, and the track spread can be reduced by more than 80 %. The introduction of input constraints maintains the control safety while also easing the burden of parameter tuning. Meanwhile, the 2/rev components of the lateral forces are similarly reduced. Furthermore, the control algorithm is modeled in software and built into real-time code to verify its effectiveness through the wind tunnel experiments. The experimental results reveal that 1/rev vibration is effectively reduced in three directions. The proposed controller also improves the aerodynamic environment of the blades, reducing almost all strange harmonic components (n-0.5)/rev (n = 1 to 10) to near zero.

Design and test of adaptive torsional vibration suppression method for helicopter power system with variable rotor speed

Synchronous Vibration Control for Magnetically Suspended Rotor System Using a Variable Angle Compensation Algorithm.

A novel constrained optimal tuning method with application to helicopter rotor track and balance

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Multi-frequency Compensation for Active Magnetic Bearing-Flexible Rotor System Based on Adaptive Least Mean Square Algorithm with a Phase Shift

A Novel Parallel Multi-Harmonic Global Multi-Channel Control Algorithm for Helicopter Active Vibration Control

Control of Drive Train Torsional Vibration of Wind Turbines

Active Vibration Control of a Flexible Rotor in Magnetically Suspended High-Speed Motor to Pass the First Bending Critical Speed with Optimal Phase Compensation Control

Micro-vibration control strategy of magnetically suspended rotor system using finite dimension adaptive filter

Barrier Function-Based Adaptive Robust Sliding Mode Control for Helicopter Vibration Reduction

Experimental investigations on active control of multifrequency helicopter vibrations using discrete model predictive sliding mode control

Vibration Reduction in A Tilting Rotor Using Centrifugal Pendulum Vibration Absorbers

Optimal control for helicopter/turboshaft engine system based on hybrid variable speed

An excellent harmonic feedforward-sliding mode output feedback hybrid algorithm for helicopter active vibration control

Numerical Simulation of Helicopter Rotor Blade Vertical Pendulum Absorbers

Dynamic Model and Vibration Characteristic Analysis on Complex Rotor System with Local Nonlinear Stiffness

Data-driven active vibration control for helicopter with trailing-edge flaps using adaptive dynamic programming

Adaptive Aeroservoelastic Mode Stabilization of Flexible Airbreathing Hypersonic Vehicle

Nonlinear dynamic of turbulent bearing-rotor system under quadratic damping with HSFD and active control

Study on Torsional Vibration Characteristics and Suppression of Electric Vehicles with Dual-Motor Drive System

Suppression of Synchronous Current Using Double Input Improved Adaptive Notch Filter Algorithm