Abstract:Recently, various types of hollow materials have been added into polymer matrices to improve the gas permeation and separation performance of polymer materials. In this study, hollow polyimide (PI) nanoparticles with microporous shells were synthesized by interfacial polymerization between 4,4-(9-fluorenylidene)-dianiline and 1,2,4,5-benzenetetracarbonyl tetrachloride in the microemulsion. Free-standing polydimethylsiloxane (PDMS)/hollow PI nanoparticles mixed matrix membranes were prepared and the gas permeation-separation performance was investigated. The hollow and porous structure of the nanoparticles was well-preserved in membranes, which reduced the mass transport resistance. The permeability firstly increased and then decreased as the nanoparticle loading increased without sacrificing the permselectivity. Compared to the neat PMDS membranes with O2 and CO2 permeability of 786 and 3484 Barrer, respectively, the mixed matrix membranes with 3 wt% hollow PI nanoparticles achieved a O2 permeability up to 1664 Barrer accompanied with an O2/N2 permselectivity of 2.3 and a CO2 permeability up to 6639 Barrer accompanied with a CO2/N2 permselectivity of 9.1 at 35 °C and 0.2 MPa. Mixed-matrix composite membranes were fabricated by dip-coating the porous polyetherimide substrate into a PDMS solution with 3 wt% nanoparticles. The resultant defect-free mixed-matrix composite membrane showed excellent O2 and CO2 permeances of up to 1677 and 6502 GPU, respectively. The air separation measurement showed that the composite membranes could produce oxygen-enriched permeate stream enriched to ca. 30 vol%.

Influence of NIPS on the structure and gas separation performance of asymmetric carbon molecular sieve membranes

Gas separation performance of supported carbon molecular sieve membranes based on soluble polybenzimidazole

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Ultra-high selectivity carbon molecular sieve membrane derived from PI/SPANI blends for efficient gas separation

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Controlled Superacid-Catalyzed Self-Cross-Linked Polymer of Intrinsic Microporosity for High-Performance CO2 Separation

Preparation and characterization of asymmetric membranes based on nonsolvent/NMP/P84 for gas separation

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Thin Composite Carbon Molecular Sieve Membranes from a Polymer of Intrinsic Microporosity Precursor

In-situ crosslinking of a novel conjugated dialkynyl-based polyimide for high performance carbon molecular sieve membrane

Post-modification of PIM-1 and simultaneously in situ synthesis of porous polymer networks into PIM-1 matrix to enhance CO2 separation performance

Polyimide-derived carbon molecular sieve membranes for advanced gas separation: from membrane development to pilot-scale operations

High performance carbon molecular sieving membranes derived from pyrolysis of metal-organic framework ZIF-108 doped polyimide matrices.

Surface modification effect of carbon molecular sieve (CMS) on the morphology and separation performance of mixed matrix membranes

Asymmetric Polyimide Mixed Matrix Membranes with Porous Materials-Modified Surfaces for CO2/N2 and CO2/CH4 Separations

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

Improving gas permeation performance of PDMS by incorporating hollow polyimide nanoparticles with microporous shells and preparing defect-free composite membranes for gas separation

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers