Abstract:High-performance and reliable membranes for efficient gas separation and their design strategies are key points for membrane-based carbon capture. Here, we reported a high-performance carbon membrane design protocol from a microporous, highly rigid polyimide precursor (6FBD1-CR), which was produced by in-situ crosslinking a polyimide (6FBD1) containing conjugated dialkynyl group at 300 °C. The possible crosslinking mechanisms are the [2+2+2] trimerization of three ethynyl groups to form a benzene ring and the Diels-Alder reaction between the ethynyl bond and phenylacetylene to generate the fused naphthalene ring. After crosslinking, the membrane shows a ∼ 8-fold improved microporosity (37.1–298 m 2 g −1 ). When pyrolyzed at 550 °C, the resulting 6FBD1-CMS demonstrates very high pure- and mixed-gas separation performance. E.g., the CO 2 permeability reaches 7661 Barrer and CO 2 /CH 4 selectivity of 44, additionally, even at the CO 2 /CH 4 mixed-gas pressure of 30 bar, the P CO2 can still reach 4920 Barrer combined with a α CO2/CH4 of 28, which is well above the latest CO 2 /CH 4 mixed-gas Upper Bound line. We consider this is due to the acetylene crosslinking induced a very stable microporous structure composed of rigid fused rings that alleviate the micropore collapse during the carbonization process, and thus, resulting in a relatively higher BET surface area, larger d-spacing, relatively higher concentration of continuous disordered phase (higher sp 3 /sp 2 ) and small activation energy (Ep) for gas transport than the CMSM derived from polyimide without pre-crosslinking. This finding provides new opportunity for the structural design of high-performance CMSMs.

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Advanced carbon molecular sieve membranes derived from molecularly engineered cross-linkable copolyimide for gas separations

Polyamide-imide copolymer-derived carbon molecular sieve membranes for efficient hydrogen/carbon dioxide separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations

Polyimide-derived carbon molecular sieve membranes for advanced gas separation: from membrane development to pilot-scale operations

Ultra-high selectivity carbon molecular sieve membrane derived from PI/SPANI blends for efficient gas separation

In-situ crosslinking of a novel conjugated dialkynyl-based polyimide for high performance carbon molecular sieve membrane

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Thin Composite Carbon Molecular Sieve Membranes from a Polymer of Intrinsic Microporosity Precursor

Enhancing gas separation performance of polyimide with Tröger's bases: Unveiling the impact on polymer and carbon molecular sieve membranes

A review of polymer-derived carbon molecular sieve membranes for gas separation

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

High-performance carbon molecular sieve membrane for C2H4/C2H6 separation: Molecular insight into the structure-property relationships

Leveraging Molecular Scale Free Volume Generation to Improve Gas Separation Performance of Carbon Molecular Sieve Membranes

Super high gas separation performance membranes derived from a brominated alternative PIM by thermal induced crosslinking and carbonization at low temperature