Abstract:Membrane-based separation technology for carbon capture has received increasing attention in the world due to low energy consumption, investment and operating cost. However, the simultaneous improvement in selectivity and permeance has faced large challenge for mixed matrix membranes owing to limited affinity sites and transport channels. Herein, the nano-scale MIP-202 (SM-202) was first prepared by inhibited Ostwald ripening strategy during crystal growth, and then nano-scale amorphous MIP-202 (ASM-202) was prepared by thermal chemical reaction. Subsequently, mixed matrix composite membranes (MMCMs) were developed by using ASM-202 as a filler and polyether-block-amide (Pebax) as a polymer matrix, and the hydrophilicity-modified polysulfone ultrafiltration membrane (mPSf) was utilized as a porous support. It is observed that ASM-202 possessed good miscibility with Pebax polymer chains as a result of hydrogen bonds between two phases. Thus, the as-obtained MMCMs showed outstanding CO2 separation performance (CO2 permeance: 936 GPU; CO2/N2 selectivity: 52), which were enhanced by 138 % and 108 % over that of the pristine Pebax membrane, as well as 15.3 % and 13.0 % over that of MMCMs incorporating with SM-202, respectively. The improvement in gas separation performance can be explained by the reason that the nano-scale ASM-202 with large specific surface area afforded more unsaturated metal sites and nitrogen-doped structure, thus improving the CO2 affinity in membranes. Moreover, the loose amorphous structure of ASM-202 provides more transport passageways, which enhanced the diffusion rate of gas molecules through the membranes. Besides, resultant MMCMs maintained great stability for over 360 h using the CO2/N2 mixed gas as feed gas, whose average CO2 permeance and CO2/N2 selectivity fluctuated at 880 GPU and 47.

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

High-performance Multilayer Composite Membranes with Mussel-Inspired Polydopamine As a Versatile Molecular Bridge for CO2 Separation.

Carbon Molecular Sieve Gas Separation Membranes from Crosslinkable Bromomethylated 6FDA-DAM Polyimide

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

High-Performance Carbon Molecular Sieve Membrane Derived from Pek-N Polymer for Co2 Separation

Small Molecule DOPO-p-DP Crosslinked 6Fda-Dam-br-85% Carbon Molecular Sieve Membrane with Superior Aging for Efficient Gas Separation

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Embedding Molecular Amine Functionalized Polydopamine Submicroparticles into Polymeric Membrane for Carbon Capture

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

Preparation of Mixed Matrix Membranes by Layered Double Hydroxides of Amino Acid Intercalation and Pebax for Ameliorated CO2 Separation

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

New Pebax®/zeolite Y Composite Membranes for CO2 Capture from Flue Gas

Mixed Matrix Composite Membranes Based on Pebax and Nano-Amorphous MIP-202 for CO2 Separation

Mixed Matrix Membranes Containing Well-Designed Composite Microcapsules for CO2 Separation

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Preparation of Pebax Based Ternary Mixed Matrix Membranes for Enhancing CO2 Transport and Separation