Abstract:Hydrogen (H2) has become one of the promising alternative clean energy resources. Membrane technology is a potential method for hydrogen separation or production. This study aims to develop a new carbon membrane for hydrogen separation or production. Moreover, the permeation behavior of H2, CO2, and CH4 through a hollow fiber composite carbon membrane derived from P84 co-polyimide and with incorporation of zeolite composite carbon (ZCC) was also examined. ZCC was synthesized via the impregnation method of sucrose into zeolite-Y pores, followed by carbonization at 800 °C. Thus, this filler has a high surface area, high microporosity, ordered pore structure, and low hydrophilicity. The presence of zeolites in ZCC is predicted to increase certain gases' affinity for the membrane. Various heating rates (1-5 °C/min) were applied during pyrolysis to understand the effect of the heating rate on the pore structure and H2/CO2 and H2/CH4 gas separation performance. Moreover, gas permeation was evaluated at various temperatures (298-373 K) to study the thermodynamic aspect of the process. A characteristic graphite peak was detected at 2θ ∼ 44° in all carbon samples. Scanning electron microscopy (SEM) observations revealed the void-free surface and the asymmetric structure of the carbon membranes. During the permeation test, it was found that gas permeation through the membrane was significantly affected by the temperature of the separation process. The highest permeability of H2, CO2, and CH4 was detected on the composite carbon membrane at a 3 °C/min heating rate with a permeation temperature of 373 K. The thermodynamic study shows that CO2 and H2 have lower activation energies compared to CH4. The transport mechanism of the membrane involved adsorption and activated surface diffusion. The permeation temperature has a large impact on the transport of small penetrants in the carbon matrix.

Porous ceramic hollow fiber-supported Pebax/PEGDME composite membrane for CO2 separation from biohythane

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Improving CO2 Permeability of Ceramic Hollow Fibre-Supported Composite Membranes by Blending an Ionic Liquid in the Pebax/PEGDME Selective Layer

Pebax-Based Composite Membranes with High Transport Properties Enhanced by ZIF-8 for CO2 Separation

Carbon Dioxide Enrichment PEBAX/MOF Composite Membrane for CO2 Separation

Pebax/Peg Grafted Cnt Hybrid Membranes For Enhanced Co2/N-2 Separation

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Poly ether block Amide/Polyvinyl Alcohol/ MgO nanocomposite membranes: Selectivity for CO 2 and CH 4 gases

New Generation High Performance Composite Hollow Fiber Membranes for Low Cost Co2 Capture

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

Enhanced CO 2 Separation by Functionalized g-C 3 N 4 Nanosheets as Composite Filler to Fabricate Mixed Matrix Membranes

Fabrication of highly selective hollow fiber membranes based on P84/PES blends for CO2/CH4 separation

Development of a P84/ZCC Composite Carbon Membrane for Gas Separation of H2/CO2 and H2/CH4

Pebax®/TSIL blend thin film composite membranes for CO2 separation

Nanostructured membrane material designed for carbon dioxide separation

Facile fabrication of FAS-PDMS/PEEK composite hollow fiber membrane with honeycomb-like structure for CO2 capture from flue gas by membrane absorption

Improved CO2/N2 separation performance of Pebax composite membrane containing polyethyleneimine functionalized ZIF-8

Development of cost-effective cellulose-based bilayer hybrid composite membranes for CO2 separation in biogas purification

Enhanced 2-D MOFs nanosheets/PES-g-PEG mixed matrix membrane for efficient CO2 separation