Abstract:Diagram of hydrogen bond interactions between Pebax® 1657 and SSMMP‐20%‐[bmim][Tf2N] filler. Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound. Highlights Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared. CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%. Higher CO2 pressures increase MMMs permeability. The obtained MMMs have separation performances above the Robeson upper Bound.

Poly ether block Amide/Polyvinyl Alcohol/ MgO nanocomposite membranes: Selectivity for CO 2 and CH 4 gases

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Increasing the Permeability of Carbon Dioxide and Nitrogen Gases Through a Polymer Membrane Consisting of a Modified Polyether Block Amide and Experimental Design

Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency

Improved CO 2 separation performance of mixed matrix membranes via expanded layer double hydroxides and methanol post-treatment

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Nanostructured membrane material designed for carbon dioxide separation

Improving CO2 Permeation and Separation Performance of CO2-philic Polymer Membrane by Blending CO2 Absorbents

Carbon Dioxide Enrichment PEBAX/MOF Composite Membrane for CO2 Separation

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Modeling of the Effect of Nanoparticles on CO2/CH4 Selectivity of Poly (4-methyl-1-pentene)-Based Mixed Matrix Membranes

Nanocomposite polymer blend membrane molecularly re-engineered with 2D metal-organic framework nanosheets for efficient membrane CO2 capture

Advanced mixed matrix membranes of Pebax embedded with amino acid ionic liquids@PIM core-shell composite nanoparticles for CO2 separation

A Tale of Two Separation Properties: Bulk and Thin Films of Mixed Matrix Materials

Poly (Vinyl Alcohol) Composite Membrane with Polyamidoamine Dendrimers for Efficient Separation of CO2/H2 and CO2/N2

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Tailored design of CO 2 -selective mixed-matrix membranes using nitrile-functionalized COFs as 2D nanofillers

Porous ceramic hollow fiber-supported Pebax/PEGDME composite membrane for CO2 separation from biohythane

Enhancing the Gas Separation Selectivity of Mixed-Matrix Membranes Using a Dual-Interfacial Engineering Approach