Abstract:Membrane technology is acknowledged as one of the most efficient for biogas upgrading, separating simultaneously CH4 and CO2 in the retentate and permeate streams, respectively. The sustainability would still be improved by using renewable and environmentally friendly materials for membrane fabrication. Specifically, this study is focused on laboratory-scale mixed gas separation tests of composite membranes prepared from chitosan (CS), a hydrophilic, biodegradable and biocompatible polymer from abundant natural resources, with good adhesive and film forming properties and high affinity for CO2 due to the primary amine and hydroxyl groups functionalities in CS. To improve mechanical resistance and CO2/CH4 separation, CS was hybridized by a 5 wt% loading of non-toxic ionic [emim][acetate] liquid (IL), and variable loadings of compatible inorganic fillers, such as 3D zeolite 4A and NaETS-10, and layered AM-4 titanosilicate. The CS-based mixed matrix layer was coated on porous polyether sulfone (PES) support. The CO2 permeance and CO2/CH4 separation were measured at different feed concentrations to evaluate the membranes performance in the treatment of different streams. This separation behavior was explained by the wet thickness, water uptake, morphology and ionic resistance of the composite membrane. As such, the 5 wt% Zeolite 4A and NaETS-10-filled ILCS/PES membranes provided a good dispersion in the ILCS matrix and the mixed matrix layer a good adhesion with the porous PES support, leading to high CO2 permeances and separation factors up to 30, whereas the more hydrophilic lamellar AM-4 titanosilicate-filled ILCS layer showed cluster agglomeration in the matrix and a faster detachment of the coated layer from the PES substrate. With increasing filler loading, an increase of the permeance of both CO2 and CH4 gas components was, although selectivity decreased upon increasing AM-4 filler loading. The CO2/CH4 mixed gas separation performance was validated by a custom-built model for a wide range of feed composition, to cover such processes as natural gas sweetening, biogas upgrading and enhanced oil recovery with acceptable relative error below 10% (absolute value), except for the AM-4 titanosilicate-filled ILCS membranes, showing morphological fabrication defects.

Development of cost-effective cellulose-based bilayer hybrid composite membranes for CO2 separation in biogas purification

Process optimization of CO2membrane and cryogenic hybrid separation

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Large-scale preparation of composite membranes for CO2 separation via interfacial polymerization: Monomer selection and processing parameter optimization

New Generation High Performance Composite Hollow Fiber Membranes for Low Cost Co2 Capture

Study of mixed matrix membranes with in situ synthesized zeolite imidazolate frameworks (ZIF-8, ZIF-67) in polyethersulfone polymer for CO2/CH4 separation

Chitosan-based mixed matrix composite membranes for CO2/CH4 mixed gas separation. Experimental characterization and performance validation

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Techno-Economic Optimization of Multistage Membrane Processes with Innovative Hollow Fiber Modules for the Production of High-Purity CO2 and CH4 from Different Sources

Efficient Facilitated Transport Polymer Membrane for CO2/CH4 Separation from Oilfield Associated Gas

Boosting Membranes for CO2 Capture toward Industrial Decarbonization

Enhanced CO2/CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Cellulose Acetate–Ionic Liquid Blends as Potential Polymers for Efficient CO2 Separation Membranes

High-performance multi-layer composite membrane with enhanced interlayer compatibility and surface crosslinking for CO2 separation

Enhanced CO 2 Separation by Functionalized g-C 3 N 4 Nanosheets as Composite Filler to Fabricate Mixed Matrix Membranes

Preparation of Biomass-Based Gas Separation Membranes from Biochar Residue Obtained by Depolymerization of Lignin with ZSM-5 to Promote a Circular Bioeconomy.

ZIF-301 MOF/6FDA-DAM polyimide mixed-matrix membranes for CO2/CH4 separation

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

Unlocking advanced CO2 separation via a scalable and nitrogen-rich MOF-cross-linked polydimethylsiloxane hollow fiber hybrid membrane

Feasibility Prediction of Thermally Rearranged Polyimide Membranes with Ionic Liquid Capping for Large‐Scale Industrial Biogas Purification Applications