Abstract:Diagram of hydrogen bond interactions between Pebax® 1657 and SSMMP‐20%‐[bmim][Tf2N] filler. Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound. Highlights Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared. CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%. Higher CO2 pressures increase MMMs permeability. The obtained MMMs have separation performances above the Robeson upper Bound.

Surface modification effect of carbon molecular sieve (CMS) on the morphology and separation performance of mixed matrix membranes

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

-SO3H Functionalized UiO-66 Nanocrystals in Polysulfone Based Mixed Matrix Membranes: Synthesis and Application for Efficient CO2 Capture

CARBON DIOXIDE/METHANE SEPARATION PERFORMANCE BY MIXED MATRIX MEMBRANE FROM POLYSULFONE/ HALLOYSITE NANOTUBES

Investigation of the effect of Ni and Cu variant MOF-74 in the Polydimethylsiloxane (PDMS)-based Mixed Matrix Membranes (MMMs) for efficient gas separation applications

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Development of Mixed Matrix Membranes by Using NH2‐Functionalized UiO‐66 and [APTMS][AC] Ionic Liquid for the Separation of CO2

Modified Zeolite/Polysulfone Mixed Matrix Membrane for Enhanced CO2/CH4 Separation

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

Carbon molecular sieve/ZSM-5 mixed matrix membranes with enhanced gas separation performance and the performance recovery of the aging membranes

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Mixed matrix membranes with intrinsic microporous/UiO-66 post-synthesis modifications with no defects for efficient CO 2 /N 2 separation

Leveraging Molecular Scale Free Volume Generation to Improve Gas Separation Performance of Carbon Molecular Sieve Membranes

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency

A new segment-level mixing strategy to improve the gas separation performances of carbon molecular sieve membrane derived from polymer blends

High Selective Mixed Membranes Based on Mesoporous MCM-41 and MCM-41-NH2 Particles in a Polysulfone Matrix

Development of highly permselective Mixed Matrix Membranes comprising of polyimide and Ln-MOF for CO2 capture