Abstract:A significant obstacle that persists in the field of membrane-based gas separation is the development of advanced membranes. In this study, a series of thermally rearranged (TR) membrane precursors (6FDA/ODA/6FAP) with gradient concentration of 6FAP was selected for carbon molecular sieve membranes (TR-CMS) formation. The investigation into the structural evolution from polyimide to TR precursor and finally to CMS membrane utilized various characterization techniques to manipulate the relationship between membrane structure formation and their separation performance. Results show that the structural properties of intermediate TR-polymers, strongly influenced by the –OH content, significantly affect the resultant CMS membrane performance. Specifically, a higher –OH concentration in pristine membrane at 450 °C increases chain rigidity and FFV, leading to a more open pore structure and enhanced gas permeability in TR membranes. Interestingly, TR-CMS derived from increased PBO content exhibits a marked decrease in BET surface area, which correlates with improved molecular sieving performance. This can be attributed to the increased PBO content in the precursor, facilitated degradation upon further heating, thus leads to more orderly structure of the resulting CMS, thereby significantly enhanced molecular sieving performance. The TR-CMS-0.5 sample exhibited the most favorable gas separation performance (P H2 = 3843 and P CO2 = 901 Barrer) as well as high H 2 /CH 4 (6 1 0) and CO 2 /CH 4 (1 4 3) selectivity, which exceeded the 2019 Upper bound line. In addition, the TR-CMS-0.5 demonstrates a remarkable mixed-gas CO 2 /CH 4 (50:50) separating performance that far exceeding its 2018 Upper bound line. In conclusion, the adoption of gradient PBO precursors for preparation of CMS membrane materials show great potential for hydrogen recovery and CO 2 removal from natural gas.

A new segment-level mixing strategy to improve the gas separation performances of carbon molecular sieve membrane derived from polymer blends

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Ultra-high selectivity carbon molecular sieve membrane derived from PI/SPANI blends for efficient gas separation

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Leveraging Molecular Scale Free Volume Generation to Improve Gas Separation Performance of Carbon Molecular Sieve Membranes

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Advanced carbon molecular sieve membranes derived from molecularly engineered cross-linkable copolyimide for gas separations

Simultaneously enhanced gas permeability, selectivity and aging stability of carbon molecular sieve membranes by the molecule doping of silicon

Excellent gas separation performance of hybrid carbon molecular sieve membrane derived from polyimide/10X zeolite for hydrogen purification

Surface modification effect of carbon molecular sieve (CMS) on the morphology and separation performance of mixed matrix membranes

Polyimide-derived carbon molecular sieve membranes for advanced gas separation: from membrane development to pilot-scale operations

High-performance carbon molecular sieve membrane for C2H4/C2H6 separation: Molecular insight into the structure-property relationships

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Enhancing gas separation performance of polyimide with Tröger's bases: Unveiling the impact on polymer and carbon molecular sieve membranes

Tailoring sub-3.3 Å ultramicropores in advanced carbon molecular sieve membranes for blue hydrogen production

Enhancing the Gas Separation Selectivity of Mixed-Matrix Membranes Using a Dual-Interfacial Engineering Approach