Abstract:Carbon molecular sieve (CMS) membranes were fabricated by designing the polyimides with different diamine moiety such as PPD, ODA, BAPP and BDAF to investigate the effects of multiscale structures of precursors on the microstructure and CO2 separation performance of the derived CMS membranes. The multiscale structures of polymeric precursor were characterized and simulated in terms of the characteristic of functional groups, the flatness of repeat units, the conformation of single chains, the packing efficiency of multi-chain network and the fractional free volume (FFV) of bulk polymers. The microstructure and CO2 separation performance of derived CMS membrane were characterized by XRD, TEM and gas permeation measurements. The CO2 permeation behavior of CMS membranes derived from different precursors was analyzed. Results indicated that the multiscale structures of polyimides significantly influenced the microstructure and CO2 separation performance of derived CMS membranes. Increased FFV (or reduced flatness of repeat units) in the precursor results in an increased disorder degree of carbon structure in the derived CMS membranes. The CMS membranes prepared by high FFV polyimide with helical chain conformation showed the looser carbon structure that are beneficial to CO2 transport compared with that prepared by polyimide with rod-like chain conformation. The larger size of the pendant functional groups (i.e. V-(CF3)2 > V-(CH3)2) in polyimide results in higher CO2 permeability of the derived CMS membranes. The BDAF-PMDA derived CMS membrane pyrolyzed at 700 degrees C show a high CO2 permeability (0.1 MPa of 50/50 mol.% mixed gas feed) of about 3000 Barrer and moderate CO2/CH4 selectivity, which exhibit an attractive application prospect for CO2 separation.

Tailoring sub-3.3 Å ultramicropores in advanced carbon molecular sieve membranes for blue hydrogen production

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Precise molecular sieving using metal‐doped ultramicroporous carbon membranes for H2 separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation

Carbon hollow fiber membranes for a molecular sieve with precise-cutoff ultramicropores for superior hydrogen separation

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Unexpectedly Strong Size-Sieving Ability in Carbonized Polybenzimidazole for Membrane H2/CO2 Separation

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

High hydrogen permselective carbon molecular sieve membrane and its structural formation mechanism

Carbon Molecular Sieve Membranes Derived from Hydrogen-Bonded Organic Frameworks for CO2/CH4 Separation

Coordination Enhancement of Hydrogen and Helium Recovery in Polybenzimidazole-Based Carbon Molecular Sieve Membranes

Excellent gas separation performance of hybrid carbon molecular sieve membrane derived from polyimide/10X zeolite for hydrogen purification

Fine Ultra-Micropore Control Using the Intrinsic Viscosity of Precursors for High Performance Carbon Molecular Sieve Membranes

Carbon Molecular Sieve Gas Separation Membranes from Crosslinkable Bromomethylated 6FDA-DAM Polyimide

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

Ultraselective carbon molecular sieve membrane for hydrogen purification

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

Novel approaches to fabricate carbon molecular sieve membranes based on chemical modified and solvent treated polyimides