Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

The role of geometry precision in frequency-resonance method for non-destructive wood assessment – numerical case study on sugar maple

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

Determining the dynamic properties of spruce wood using the Taylor anvil test

Material model of thermally modified resonance spruce (Picea abies Karst.) for linear damped modal analysis

Influence of timber moisture content on wave time-of-flight and longitudinal natural frequency in coniferous species for different instruments

A novel identification method for obtaining bending moment–curvature relations of wood stems based on digital image correlation and SDOF analysis

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

Using Stress Wave Based Technology for Wood Material Nondestructive Testing

The Study of Wood Knots Using Acoustic Nondestructive Testing Methods.

Multi-physical modeling and numerical simulation of the thermo-hygro-mechanical treatment of wood

Measuring Poisson’s ratio: mechanical characterization of spruce wood by means of non-contact optical gauging techniques

Finite element simulation based‐on atomic force microscopy and nanoindentation for spruce wood microstructure analysis

Elasto-plastic material model of green beech wood

WAVET, a custom device able to measure viscoelastic properties of wood under water saturated conditions (WAVET : Environmental Vibration Analyser for Wood)

Measuring Radial Variation in Basic Density of Pendulate Oak: Comparing Increment Core Samples with the IML Power Drill

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Characterizing Mechanical Properties of Layered Engineered Wood Using Guided Waves and Genetic Algorithm

Rheological Model for Wood

Profiling Mechanical Properties of Wood via Scratch Tests and Nanoindentation for Use in Dendrochronology