Abstract:A multi-scale framework is proposed for the prediction of the macroscopic hygro-elastic properties of oak wood. The distinctive features of the current multi-scale approach are that: (i) Four different scales of observation are considered, which enables the inclusion of heterogeneous effects from the nano-, micro-, and meso-scales in the effective constitutive behavior of oak at the macro-scale, (ii) the model relies on three-dimensional material descriptions at each considered length scale, and (iii) a moisture-dependent constitutive assumption is adopted at the nano-scale, which allows for recovering the moisture dependency of the material response at higher scales of observation. In the modeling approach, oak wood is assumed as homogeneous at the macro-scale. The meso-scale description considers the cellular structure of individual growth rings with three different densities. At the micro-scale, the heterogeneous nature of cell walls is described by the characteristics of the primary and secondary cell wall layers. Finally, the nano-scale response is determined by cellulose micro-fibrils embedded in a matrix of hemicellulose and lignin. The oak properties at the four length scales are connected via a three-level homogenization procedure, for which, depending on the geometry of the fine-scale configuration, an asymptotic homogenization procedure or Voigt averaging procedure is applied at each level to determine the effective hygro-elastic properties at the corresponding coarse scale. In addition, the moisture adsorption isotherms at each scale are constructed from a volume-weighted averaging of the moisture adsorption characteristics at the scale below. The computational results demonstrate that the macro-scale moisture-dependent, hygro-elastic behavior of oak wood is predicted realistically, thereby revealing the influence of the material density, the micro-fibril orientation, and the hygro-elastic properties from the underlying scales. The computed macro-scale properties of oak are in good agreement with experimental data reported in the literature.

Rheological Model for Wood

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Multi-physical modeling and numerical simulation of the thermo-hygro-mechanical treatment of wood

A novel constitutive model for the porosity related super-large deformation and anisotropic behavior of wood under perpendicular to grain compression

Nonlinear three-dimensional anisotropic material model for failure analysis of timber

A 3D multi-scale hygro-mechanical model of oak wood

A constitutive model considering creep damage of wood

Three-Dimensional Combined Elastic-Plastic and Damage Model for Nonlinear Analysis of Wood

The generalized Kelvin chain-based model for an orthotropic viscoelastic material

Elasto-plastic material model of green beech wood

A Phenomenological Thermal-Mechanical Viscoelastic Constitutive Modeling For Polypropylene Wood Composites

Rheological behavior of wood in stress relaxation under compression

THE ANALYTICAL SOLUTION OF A MORPHOLOGY-BASED MODEL USED TO EVALUATE THE INFLUENCE OF DAMAGE FOR WOOD STRUCTURES

Finite Element Modeling of the Dynamic Response of Plywood

Experimental Investigation on the Rheological Behavior of Timber in Longitudinal and Transverse Compression

Prediction of moisture-induced cracks in wooden cross sections using finite element simulations

Modeling of Damage Evolution in Soft-Wood Perpendicular to Grain by means of a Discrete Element Approach

Mechanics of a Biomimetic Moisture Sensitive Actuator Based on Compression Wood

Moisture and short-term time-dependent behavior of Norway spruce clear wood under compression perpendicular to the grain and rolling shear

Moisture-induced Damage Evolution in Laminated Beech

Uniaxial constitutive models for wood under cyclic compression loads with varying loading orientations