Abstract:Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood microfibril and cell are proposed to analyze orthotropic mechanical behavior. Lignin, hemicellulose and crystalline-amorphous cellulose core of spruce are concerned in spruce nanoscale model. The equivalent elastic modulus and yield strength of the microfibril are gained by the RVE simulation. The anisotropism of the crystalline-amorphous cellulose core brings the microfibril buckling deformation during compression loading. The failure mechanism of the cell-wall under axial compression is related to the distribution of amorphous cellulose and crystalline cellulose. According to the spruce cell observation by scanning electron microscope, numerical model of spruce cell is established using simplified circular hole and regular hexagon arrangement respectively. Axial and transverse compression loadings are taken into account in the numerical simulations. It indicates that the compression stress–strain curves of the numerical simulation are consistent with the experimental results. The wood microstructure arrangement has an important effect on the stress plateau during compression process. Cell-wall buckling in axial compression induces the stress value drops rapidly. The wide stress plateau duration means wood is with large energy dissipation under a low stress level. The numerical results show that loading velocity affects greatly wood microstructure failure modes in axial loading. For low velocity axial compression, shear sliding is the main failure mode. For high velocity axial compression, wood occur fold and collapse. In transverse compression, wood deformation is gradual and uniform, which brings stable stress plateau.Graphic abstract

Uniaxial constitutive models for wood under cyclic compression loads with varying loading orientations

A novel constitutive model for the porosity related super-large deformation and anisotropic behavior of wood under perpendicular to grain compression

A nonlinear constitutive model for characterizing wood under compressive load and its test verification

Mechanical Properties of Dahurian Larch Wood under Cyclic Loading: Experiments and Constitutive Model

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Monotonic and cyclic load of pine wood under uniaxial compression: experiments and modeling

A new approach on constitutive modeling for quasi-brittle materials under multiaxial loading

A Two-Dimensional Lattice Model for Simulating the Failure and Fracture Behavior of Wood

Three-Dimensional Combined Elastic-Plastic and Damage Model for Nonlinear Analysis of Wood

A Multiscale Mechanics Model for Elastic Properties of Densified Wood

Damage Theoretical Analysis of 2.5D C/SiC Composites under Tensile and Shear Loading

A Dynamic Constitutive Model for Fiber-Reinforced Composite under Impact Loading

Rheological Model for Wood

A Damage Constitutive Model for the Nonlinear Mechanical Behavior of C/SiC Composites During Mechanical Cyclical Loading/unloading

Experimental Study on the Mechanical Properties of Wood Subjected to Combined Perpendicular-to-grain Normal and Rolling Shear Loads

A Damage Constitutive Model for Intermittent Jointed Rocks under Cyclic Uniaxial Compression

New Multi-Axial Constitutive Models for Large Elastic Deformation Behaviors of Soft Solids Up to Breaking

Constitutive model for simulating the mechanical behaviour of rock under triaxial cyclic loading

Modeling crack propagation in wood by extended finite element method

Micromechanics of Wood Cell Wall

A nonlinear elasto-plastic bond model for the discrete element modeling of woody biomass particles