Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

A novel 3.3 kV 4H-SiC trench PiN with enhanced conductance modulation effect

A Novel SiC Trench MOSFET with Self-Aligned N-Type Ion Implantation Technique

Development Of 3.6 Kv 4h-Sic Pin Power Diodes

Design and Experimental Study of 1.2kV 4H-SiC Merged PiN Schottky Diode

Theoretical and Experimental Study of 13.4 kV/55 A SiC PiN Diodes with an Improved Trade-Off between Blocking Voltage and Differential On-Resistance

Enhanced On-State Performance Trench IGBT with a Self-Aligned P Base

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

1.2-Kv 4H-Sic Merged PiN Schottky Diode with Improved Surge Current Capability

1.4 kV, 25 A, PT and NPT trench IGBTs with optimum forward characteristics

1.2Kv SiC Merged PiN Schottky Diode with Improved Surge Current Capability

Improving Surge Current Capability of SiC Merged PiN Schottky Diode by Adding Plasma Spreading Layers

A novel 4H-SiC pinched barrier rectifier

4 700V SiC PiN Rectifier

A Novel SiC Trench MOSFET Structure with Enhanced Short Circuit Robustness

4H-SiC Trench MOSFET Structure with Wrap N-type Pillar for Low Oxide Field and Enhanced Switching Performance

A Comparative Study of Silicon Carbide Merged PiN Schottky Diodes with Electrical-Thermal Coupled Considerations

SiC Trench MOSFET with Depletion-Mode pMOS for Enhanced Short-Circuit Capability and Switching Performance

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

A Novel 4H-SiC MESFET with a Heavily Doped Region, a Lightly Doped Region and an Insulated Region

A Novel SiC Superjunction Trench MOSFET with Integrated Heterojunction Diode for Improved Performance