Abstract:It is of great significance for structural design and engineering evaluation to obtain the elastic–plastic parameters of materials. The inverse estimation of elastic–plastic parameters of materials based on nanoindentation technology has been applied in many pieces of research, but it has proved to be difficult to determine the elastic–plastic properties of materials by only using a single indentation curve. A new optimal inversion strategy based on a spherical indentation curve was proposed to obtain the elastoplastic parameters (the Young's modulus E, yield strength σy, and hardening exponent n) of materials in this study. A high-precision finite element model of indentation with a spherical indenter (radius R = 20 μm) was established, and the relationship between the three parameters and indentation response was analyzed using the design of experiment (DOE) method. The well-posed problem of inverse estimation under different maximum indentation depths (hmax1 = 0.06 R, hmax2 = 0.1 R, hmax3 = 0.2 R, hmax4 = 0.3 R) was explored based on numerical simulations. The results show that the unique solution with high accuracy can be obtained under different maximum press-in depths (the minimum error was within 0.2% and the maximum error was up to 1.5%). Next, the load-depth curves of Q355 were obtained by a cyclic loading nanoindentation experiment, and the elastic–plastic parameters of Q355 were determined by the proposed inverse-estimation strategy based on the average indentation load-depth curve. The results showed that the optimized load-depth curve was in good agreement with the experimental curve, and the optimized stress–strain curve was slightly different from the tensile test, and the obtained parameters were basically consistent with the existing research.

Determining the Constitutive Properties of Sintered Nano Silver via Reverse Analysis and Nanoindentation

Elastoplastic nanoindentation behaviors of sintered nano-silver under various sintering parameters

Research on Determining Elastic–Plastic Constitutive Parameters of Materials from Load Depth Curves Based on Nanoindentation Technology

Critical Review of Nanoindentation-Based Numerical Methods for Evaluating Elastoplastic Material Properties

Determine the unique constitutive properties of elastoplastic materials from their plastic zone evolution under nanoindentation

Calibration of a Constitutive Model from Tension and Nanoindentation for Lead-Free Solder

Nanoindentation Elastoplastic and Creep Behaviors of Sintered Nano-Silver Doped with Nickel-Modified Multiwall Carbon Nanotube Filler

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Compressive Experimental Analysis and Constitutive Model of Sintered Nano-Silver

NUMERICAL SIMULATION FOR CONE INDENTATION OF METALLIC FOAMS AND THE REVERSE ANALYSIS

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

A study of the elastic moduli of corrosion products using nano-indentation techniques

Connecting the macroscopic and mesoscopic properties of sintered silver nanoparticles by crystal plasticity finite element method

An Inverse Approach to Determine the Mechanical Properties of Elastoplastic Materials Using Indentation Tests

Identification of plastic properties through spherical indentation

Establishment of Simplified Constitutive Relationship for 3J21 Alloy and Its Nano-indentation Test

Elastic Modulus Identification of Particles in Particulate Composite Through Nanoindentation

Size-dependent sharp indentation-II: a reverse algorithm to identify plastic properties of metallic materials

Determining plastic properties of a material with residual stress by using conical indentation

A Micromechanical Analysis to the Viscoplastic Behavior of Sintered Silver Joints under Shear Loading

Impact Analysis of Microscopic Defect Types on the Macroscopic Crack Propagation in Sintered Silver Nanoparticles