Abstract:Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties. The excellent mechanical properties are closely related to the activation and evolution of deformation mechanisms at the atomic scale. In this work, AlCoCrFeNi 2.1 alloy is taken as the research object. The mechanical behaviors and deformation mechanisms of the FCC and B2 single crystals with different orientations and the FCC/B2 composites with K-S orientation relationship during nanoindentation processes are systematically studied by molecular dynamics simulations. The results show that the mechanical behaviors of FCC single crystals are significantly orientation-dependent, meanwhile, the indentation force of [110] single crystal is the lowest at the elastic–plastic transition point, and that for [100] single crystal is the lowest in plastic deformation stage. Compared with FCC, the stress for B2 single crystals at the elastic–plastic transition point is higher. However, more deformation systems such as stacking faults, twins and dislocation loops are activated in FCC single crystal during the plastic deformation process, resulting in higher indentation force. For composites, the flow stress increases with the increase of B2 phase thickness during the initial stage of deformation. When indenter penetrates heterogeneous interface, the significantly increased deformation system in FCC phase leads to a significant increase in indentation force. The mechanical behaviors and deformation mechanisms depend on the component single crystal. When the thickness of the component layer is less than 15 nm, the heterogeneous interfaces fail to prevent the dislocation slip and improve the indentation force. The results will enrich the plastic deformation mechanisms of multi-principal eutectic alloys and provide guidance for the design of nanocrystalline metallic materials.

Establishment of Simplified Constitutive Relationship for 3J21 Alloy and Its Nano-indentation Test

Use of Instrumented Micro-Indentation to Study the Mesoscopic Elasto-Plastic Behavior of Gh4145/Sq Superalloy During High-Temperature Cyclic Straining

Analysis of Size Effect in Nano-indentation Process of 3J21 Alloy Foil

Investigation of fatigue mesoscopic mechanical properties of a nickel-based superalloy by instrumented microindentation measurements

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

INVESTIGATION INTO THE THERMAL DEFORMATION BEHAVIOR AND THE ESTABLISHMENT OF A CONSTITUTIVE RELATIONSHIP FOR Mn-Cr-Ni-Mo STEEL

Calibration of a Constitutive Model from Tension and Nanoindentation for Lead-Free Solder

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

Experiments and numerical simulations for the mechanical properties of Ni-based superalloys fabricated by laser melting deposition

Tensile properties and strain hardening mechanism of Cr-Mn-Si-Ni alloyed ultra-strength steel at different temperatures and strain rates

Microscopic mechanism exploration and constitutive equation construction for compression characteristics of AZ31-TD magnesium alloy at high strain rate

A modified Johnson-Cook model considering strain softening of A356 alloy

Microstructures, hot tensile deformation behavior and constitutive modeling in a superlight Mg-2.76Li-3Al-2.6Zn-0.39Y alloy

Estimation of Mechanical Properties of Aluminum Alloy Based on Indentation Curve and Projection Area of Contact Zone

A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion

The Yield Volume Fraction approach to the description of the stress-strain curve of a nickel-base superalloy

Constitutive Relationship of Ti-1023 Alloy during Isothermal Forging Processes

Determining the Constitutive Properties of Sintered Nano Silver via Reverse Analysis and Nanoindentation

Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi2.1 High Entropy Alloy during Nanoindentation

Characterization and constitutive analysis-based crystal plasticity of warm flow and fracture behaviours of 2060 Al-Cu-Li alloy