Abstract:In this work, the anisotropic tensile properties of laser additive manufactured (LAMed) GH4169 in as deposited and different heat-treated conditions are presented and the underlying mechanisms are analyzed in detail. Vertical and horizontal specimens for tensile tests were taken from as deposited (AD) and heat-treated blocks. Two heat treatment conditions with solution temperature of 980 °C and 1050 °C were considered. The tensile test results indicate different tensile properties of the vertical and horizontal samples, and such anisotropy is related to heat treatment conditions. The vertical AD sample has higher tensile strength than its horizontal counterpart, while after heat treatment, the horizontal direction shows higher tensile strength. Microstructure characterization, texture and grain morphology analyses were conducted through SEM with EBSD, XRD and TEM observations in order to figure out the main influential factors of the anisotropic tensile properties. Besides, fracture surfaces of the tensile specimens were observed to study the role of precipitates. In addition, the residual stresses in the LAMed samples in AD and heat-treated conditions were measured, and their effects on the anisotropic tensile strength were clarified by correlating the residual stress levels with the recrystallization fractions extracted from EBSD data. The obtained results show that a large number of brittle Laves phases growing along the vertical direction are distributed in the AD samples, which leads to different separation manners of Laves phase/γ matrix interfaces under different loading directions. Besides, the residuals stress level is high direction dependent in the AD samples. After heat treatment, most of the Laves phases are dissolved, and the residual stress experiences a significant variation. On the whole, the anisotropic tensile strength is mainly influenced by the residual stress level before and after heat treatment, and slightly influenced by the dissolution of the Laves phase. The present study provides a deeper understanding of the anisotropic tensile properties of LAMed GH4169, which may contribute to future engineering applications of Ni-based superalloys.

Experiments and numerical simulations for the mechanical properties of Ni-based superalloys fabricated by laser melting deposition

Mechanism of High Temperature Mechanical Properties Enhancement of Ni-based Superalloys Repaired by Laser Directed Energy Deposition: Microstructure Analysis and Crystal Plasticity Simulation

Influence of Γ/γ′ Morphology Evolution on the Mechanical Properties of Ni-based Single Crystal Superalloys Formed by Laser Metal Deposition

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Experiments and Numerical Simulations for the Fatigue Behavior of a Novel TA2-TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Microstructural Deformation Behavior of Laser Shock Peening Ni Alloys: Experimental and Molecular Dynamics Simulation Investigations

A comprehensive study of the anisotropic tensile properties of laser additive manufactured Ni-based superalloy after heat treatment

The Shear Properties and Failure Mechanism of TC11 Titanium Alloy Fabricated by Laser Melting Deposition Technology

Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting

Influences of Laser Remelting Treatments on Microstructure and Tensile Properties of Multiphase Ni3Al-based Intermetallic Alloy

Microstructures and Mechanical Properties of CrMnFeCoNi High Entropy Alloys Fabricated Using Laser Metal Deposition Technique

Experiments and modeling of microstructural and mechanical behaviors of laser-welded Ni-based superalloy at high temperatures

Influence of Selective Laser Melting Process Parameters on Microstructure and Properties of a Typical Ni-Based Superalloy

Numerical Simulation of Tensile Deformation and Failure of Aluminium Alloys Exposed to Laser Heating

Multiscale Plasticity Behavior and Fatigue Performance of Laser Melting Multi-Layer Nickel-Based Superalloys Upon Heat Treatments

Effects of Process Parameters on Microstructures and Tensile Properties of Laser Melting Deposited CrMnFeCoNi High Entropy Alloys

Enhanced Mechanical Properties of the Additively Manufactured IN738LC Superalloy Through Thermal History Management During the Laser Powder Bed Fusion Process

Hierarchical Architecture and Mechanical Behavior of K418 Ni-based Superalloys Manufactured by Laser Powder Bed Fusion

Microstructure and Mechanical Properties of Crack - Free Ni - Based Gh3536 Superalloy Fabricated by Laser Solid Forming

Study on the junction zone of NiTi shape memory alloy produced by selective laser melting via a stripe scanning strategy