Abstract:Laser-assisted diamond machining provides a cost-effective approach for cutting hard and brittle materials. To expand its practical application, a comprehensive understanding of the design methodology of the laser-assisted diamond machining system and optimization of process parameters for machining single crystal silicon is crucial. This study presents, for the first time, an optical design methodology, with a particular emphasis on the design method for diamond cutting tools. The adequacy of the proposed method is verified through optical simulation. The numerical analysis indicates that the incident surface of the diamond cutting tool should be positioned within the Rayleigh range of the laser beam, and the optimal laser incident height is determined to be 0.7 mm. Furthermore, high-temperature nanoindentation tests reveal a significant reduction in the hardness of single crystal silicon by 72.04 % and a reduction in Young's modulus by 30.70 % at a temperature of 600 °C due to increased dislocation activity. Orthogonal experiments based on the Taguchi method reveal that the feed speed has the most significant impact on the resultant force during laser-assisted diamond machining of single crystal silicon. The contribution rates of spindle speed, feed speed, cutting depth, and laser power to the resultant force are determined to be 31.47 %, 35.82 %, 22.02 %, and 8.04 % respectively. A regression model is established through multiple nonlinear regression analysis to quantify the correlation between the input parameters and the resultant force. The optimal parametric combination is determined using nonlinear programming optimization, resulting in a spindle speed of 3061.45 rpm, a feed speed of 4 mm/min, a cutting depth of 4 μm, and a laser power of 1.5 W. Validation experiments demonstrate that the established mathematical regression model accurately forecasts the resultant force.

Machine-learning guided optimization of laser pulses for direct-drive implosions - CORRIGENDUM

Machine-learning guided optimization of laser pulses for direct-drive implosions

A Machine Learning Method for the Optimization Design of Laser Pulse in Fast Ignition Simulations

Femtosecond Laser Micro-Machining of Three-Dimensional Surface Profiles on Flat Single Crystal Sapphire

Optimization of multistage femtosecond laser drilling process using machine learning coupled with molecular dynamics

Laser pulse shape designer for direct-drive inertial confinement fusion implosions

Corrections to “improved Range Tunability of DFB Lasers Based on REC Technique under Injection Current” [apr 21 DOI: 10.1109/JQE.2021.3051426]

Optimization of target compression for high-gain fast ignition via machine learning

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology

Multivariate optimization effectiveness model of single-longitudinal-mode laser under pre-laser Q-switching regime

Design of laser pulse shapes and target structures by random optimization for direct-drive inertial confinement fusion

Molecular dynamics-guided quality improvement in the femtosecond laser percussion drilling of microholes using a two-stage pulse energy process

Machine learning based laser homogenization method

Machine learning guided adaptive laser power control in selective laser melting for pore reduction

Investigation on system design methodology and cutting force optimization in laser-assisted diamond machining of single-crystal silicon

High-power 970?nm semiconductor disk laser: erratum

A Design of Debris Mitigation System for High-Repetition-rate Petawatt Laser Experiments

Automation and control of laser wakefield accelerators using Bayesian optimization

High Direct Drive Illumination Uniformity Achieved by Multi-Parameter Optimization Approach: a Case Study of Shenguang III Laser Facility.

Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm

Experimental and numerical investigation of laser-induced rock damage and the implications for laser-assisted rock cutting