Abstract:Waterjet-assisted laser drilling technology facilitates the fabrication of high-quality micro-holes by utilizing the collaborative benefits of waterjets and lasers. In this study, the coaxial waterjet-assisted laser drilling (CWALD) technique was employed to improve the properties of micro-holes during femtosecond laser drilling. Based on computational fluid dynamics (CFD) simulations, the stability of the waterjet was initially verified by optimizing the structure of the watercourse and nozzle shape in the CWALD device. Furthermore, a comparative experiment between laser direct drilling (LDD) and CWALD revealed that while CWALD can produce well-rounded micro-holes with a high aspect ratio, it exhibits lower efficiency and results in a larger heat-affected zone (HAZ). To address these drawbacks associated with CWALD, a two-step coaxial waterjet-assisted composite laser drilling (TS-CWALD) method was proposed. TS-CWALD involves applying CWALD for secondary modification of micro-hole shape following LDD with punching. This modification process is pivotal for enhancing drilling accuracy but requires consideration of multiple parameters. For this purpose, regression models were established for the inlet diameter, outlet diameter, and taper; response surface methodology was then employed to optimize these parameters. Subsequently, interactive effects analysis was conducted on different responses based on laser pulse energy, frequency, modification speed, and number of modification cycles. The adequacy of the developed models was subsequently verified using analysis of variance methods. Finally, the successful fabrication of a film hole with an inlet diameter of 205 μm and an outlet diameter of 200 μm, featuring a taper of only 0.2°, was achieved ultimately through meticulous parameter optimization. Furthermore, the micro-hole retained a minimal HAZ. The optimized parameters encompassed a pulse energy of 20.6 μJ, frequency of 127 kHz, modification speed of 3 mm/s, and shape modification carried out over 335 cycles.

Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm

Optimization of multistage femtosecond laser drilling process using machine learning coupled with molecular dynamics

Optimization of Laser Cutting Path Based on Local Search and Genetic Algorithm

Design of a Femtosecond Laser Percussion Drilling Process for Ni-Based Superalloys Based on Machine Learning and the Genetic Algorithm

Temporal and spatial heat input regulation strategy for high-throughput micro-drilling based on multi-beam ultrafast laser

Optimization of the femtosecond laser trepan drilling strategy on IN792 for improving hole geometrical characteristics and machining efficiency

Accelerating ultrashort pulse laser micromachining process comprehensive optimization using a machine learning cycle design strategy integrated with a physical model

Femtosecond Laser Micro-Machining of Three-Dimensional Surface Profiles on Flat Single Crystal Sapphire

Molecular dynamics-guided quality improvement in the femtosecond laser percussion drilling of microholes using a two-stage pulse energy process

Temporally modulated laser power dynamic drilling strategy with comprehensive optimization of quality and efficiency

Experimental investigation and optimization of modification during coaxial waterjet-assisted femtosecond laser drilling

Hybrid modeling and optimization of fiber laser hole cutting of austenitic stainless-steel sheets using response surface

Fabrication of micro holes using low power fiber laser: surface morphology, modeling and soft-computing based optimization

Process modeling and optimization in laser drilling of bulk metallic glasses based on GABPNN and machine vision

Femtosecond laser processing of controlled tapered micro-holes based on dynamic control of relative attitude

Optimization mechanism and applications of ultrafast laser machining towards highly designable 3D micro/nano structuring

Accurate Inverse Process Optimization Framework in Laser Directed Energy Deposition

Dual-Method Characterization and Optimization of Drilling Parameters for Picosecond Laser Drilling Quality in CFRP

Optimization of Femtosecond Laser Drilling Process for DD6 Single Crystal Alloy

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology

Improvement of the surface condition of laser-drilled holes via a dual-wavelength double-pulse train