Abstract:The paper investigates the characteristics of the laser beam percussion micro-drilling (LBPMD) process in aerospace nickel-based superalloy Hastelloy X using microsecond pulses. The quality of the drilled hole is crucial in laser beam micromachining, and selecting appropriate process parameters significantly impacts the hole's quality. The objective is to achieve predefined hole dimensions with minimal taper angles. Additionally, the study focuses on the alteration of pulse width, which is a combination of laser pulse frequency and duty cycle. Laser power ( P ), duty cycle % ( D ), focal plane position ( FPP ), and laser frequency ( f ) are considered input parameters, while geometric features such as inlet and outlet diameters, hole taper angle, and inlet circularity are examined as process responses. ANOVA is employed to establish significant relationships between process parameters and response variations based on experimental tests. Creating a precise simulation model that accurately accounts for the moving boundary of the target material's receding surface is a crucial and challenging task in formulating the laser heat conduction problem. It is necessary to simultaneously capture the material's dynamic front movement and update the boundary conditions of the laser source. To model the micro-drilled hole with LBPMD, the UMESHMOTION and DFLUX subroutines, along with the arbitrary Lagrangian-Eulerian (ALE) adaptive remesh algorithm in the AbaqusTM software, are utilized. Notably, no previous numerical study has predicted the geometry of micro-drilled holes using this technique. The proposed procedure is validated through the predictions of inlet and outlet hole diameters. Special emphasis is placed on the validation of models. Consequently, the numerical model and statistical model are compared as well as the need to define model applicability. The study demonstrates that all input parameters significantly influence the inlet hole diameter, while the pulse width notably affects the taper angle and circularity. The interaction between high laser frequency and low duty cycle results in reduced pulse duration. Multi-objective optimization is performed to determine the optimal process parameter settings for desired quality characteristics, considering minimum hole taper angle, precise inlet diameter, and maximum inlet circularity of the hole as optimization criteria. The findings show that with the optimized predicted results obtained from the optimal input variables, a composite desirability of 92% can be achieved.

Fabrication of micro holes using low power fiber laser: surface morphology, modeling and soft-computing based optimization

Experimental investigation and optimization of modification during coaxial waterjet-assisted femtosecond laser drilling

Optimization of PC micro-drilling using a continuous CO2 laser: an experimental and theoretical comparative study

Experimental Study on Geometric Precision of Microholes Drilling by Picosecond Laser

Fabrication of Millimeter-Scaled Holes by Femtosecond Laser Filamentation

Influence of parameters on performance characteristics and defects during laser microdrilling of titanium alloys using RSM

A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization

Hybrid modeling and optimization of fiber laser hole cutting of austenitic stainless-steel sheets using response surface

Investigation of Microhole Quality of Nickel-Based Single Crystal Superalloy Processed by Ultrafast Laser

Optimizing laser-based micro-cutting for PMMA microfluidic device fabrication: thermal analysis and parameter optimization

Investigations on the interaction of laser parameters for efficient microdrilling of NiTiV smart alloy system

Femtosecond laser processing of controlled tapered micro-holes based on dynamic control of relative attitude

Modelling and optimisation of a femtosecond laser micro-machining process for micro-hole array products

Surface Quality and Material Removal Rate in Fabricating Microtexture on Tungsten Carbide via Femtosecond Laser

Optimization of multistage femtosecond laser drilling process using machine learning coupled with molecular dynamics

Parametric optimization of hole taper control in ultraviolet nanosecond laser micro-drilling of copper foil

Experimental Investigation and Optimization on Trepanning Drilling in K24 Superalloy by Femtosecond Laser Via Orthogonal Experiment

Microstructural characterization and measurement of laser responses of lens developed novel titanium matrix composite

Process in laser drilling of deep microholes without taper on metal materials

Micromoles Drilling in Ti-6Al-4V Titanium Alloy by Laser and Electrochemical Machining

Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm