Abstract:Nickel–titanium (NiTi) shape memory alloy has diverse applications, especially in areas such as the medical, aerospace, and aeronautical industries. Due to this alloy's excellent fatigue strength, high mechanical properties even at higher temperatures, and tendency to corrosion resistance, NiTi alloy is considered difficult to machine. In the present scenario, electrochemical arc machining ECAM (hybrid of electric discharge erosion and electrochemical dissolution) is an evolving procedure for difficult to machine the materials due to constraints of existing processes. The present research aims to investigate the machinability of Ni 55.7 Ti alloy through electrochemical arc drilling using molybdenum electrode. Electrolyte concentration (ethanol with ethylene glycol and sodium chloride), supply voltage, and tool rotation are considered as the variable factors in order to evaluate the ECAM performance characteristics in drilling blind hole operation concerning overcut, tool wear rate, and materials removal rate. Consequently, response surface methodology is implemented for predictive modeling of various performance characteristics. Finally, multi-objective optimization through DFA has produced a set of optimal parameters to improve the productivity along with the accuracy, which is the prime requirement for the industrial applicability of the ECAM process. Results demonstrated that supply voltage is the influential key factor for improvement of machining rate. SEM photographs revealed the development of HAZ, white layer, melted droplet, craters, re-solidified material, ridge-rich surface, and voids as well as cavities around the end-boundary surfaces of a blind hole. Composition analysis through EDS indicated the oxygen content on the machined surface because electrolyte breakdown causes oxidation to take place at elevated temperatures across the machining zone. Moreover, carbide precipitation like TiC was found in the melting zone of the drilled hole which has the affinity to reduce the SMA properties in HAZ.

Investigations on the interaction of laser parameters for efficient microdrilling of NiTiV smart alloy system

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Fiber laser cutting study on ternary NiTiV shape memory alloy

Fiber Laser Cutting of Cu–Zr Added Quaternary NiTi Shape Memory Alloy: Experimental Investigation and Optimization

Investigation and optimization in electrochemical arc drilling of Ni55.7Ti nickel–titanium shape memory alloy with molybdenum electrode

Cutting NiTi with Femtosecond Laser

Abrasive aqua jet machining of NiTiV ternary smart alloy

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties

Nickel‐Titanium Alloy Laser Micromachining: A Review of Nitinol Laser Processes and Optimization for High‐Speed Laser Cutting

Fabrication of micro holes using low power fiber laser: surface morphology, modeling and soft-computing based optimization

Investigating drilling efficiency: a study on indexable centerless drilling of Ti-6Al-4 V alloy

Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

Aqua jet integrated fiber laser machining of quaternary NiTiCuZr alloy

Optimization of Cutting Conditions, Parameters, and Cryogenic Heat Treatment for Surface Roughness in Milling of NiTi Shape Memory Alloy

Microstructure and corrosion behavior of laser processed NiTi alloy

A Study on Optimum Machinability of NiTi Shape Memory Alloy Via AWJ

Experimental investigation during nano powder added μ-ED milling on nickel-titanium shape memory alloy

Dissimilar Laser Welding of NiTi Alloy with Ferrous and Non-ferrous Material: Optimization of Process Parameters

Effect of Volume Energy Density on Selective Laser Melting Niti Shape Memory Alloys: Microstructural Evolution, Mechanical and Functional Properties

Laser and Electron-Beam Surface Processing on NiTi Shape Memory Alloys: A Review

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing