Abstract:The effect of the coupling texture on the friction and wear of a piston rod-rubber seal pair under lubricating conditions is studied in this paper. Crescentiform textures with different area densities were fabricated on high carbon chromium bearing steel (GCr15) and ethylene propylene diene monomer (EPDM) materials by using a laser marking machine. We compare and analyze the effects of untextured, single-textured, and coupling-textured surfaces on the friction characteristics of the piston rod-rubber seal pair by conducting tests on the reciprocating module of the UMT-2 friction and wear testing machine. The results showed that the coupling-textured surface had the lowest coefficient of friction and wear compared to the untextured and single-textured surfaces. When the normal load was 10 N under the optimal coupling texture area density (6.4%), the friction and wear of the sealing pair decreased the most. Compared with the untextured surface, the friction coefficient was reduced by 27.9% and the wear amount was reduced by 30.0%; compared with the single-textured surface, the friction coefficient was reduced by 18.9%, and the wear amount was reduced by 23.8%. The coupling effect generated by the coupling texture effectively enhanced the formation and stabilization of the oil lubricant film and effectively captured wear debris, preventing it from continuously scratching the surface and reducing wear and roughness.

Texture shape optimization induced higher load carrying capacity of sealing ring based on improved PSO algorithm

Multi-objective optimization of surface texture shape in fluid mechanical face seals using mass-conserving cavitation boundary condition

Multi-objective Optimization of Surface Texture for the Slipper/swash Plate Interface in EHA Pumps

Sealing performance and optimization design of squamous textured mechanical seal

Effect of surface square textures on the physical field of static and dynamic pressure thrust bearings and multi-objective optimization

The optimization design for the journal-thrust couple bearing surface texture based on particle swarm algorithm

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

Research on the Profile Design of Surface Texture in Piston Ring of Internal Combustion Engine

Optimization of Groove Texture Profile to Improve Hydrodynamic Lubrication Performance: Theory and Experiments

Optimization Tool Based on Multi-Objective Adaptive Surrogate Modeling for Surface Texture Design of Slipper Bearing in Axial Piston Pump

Texture Optimization and Verification for the Thrust Bearing Used in Rotary Compressors Based on a Transient Tribo-Dynamics Model

Improving engine's lubrication based on optimised partial micro-textures

Effect of Compound Texture on Lubrication and Sealing Performance of Plunger Pump

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Optimization of surface texture distribution on the thrust bearing using the mass-conserving cavitation boundary condition: Theory and experiments

Experimental Study on Texture Coupling Mechanism and Antifriction Performance of Piston Rod Seal Pair

Coupled Optimization of Groove Texture for Parallel Ring–Ring Friction Pairs: Theory and Experiments

Evaluation and Optimization of Axial Piston Pump Textured Slipper Bearings with Spherical Dimples Based on Hybrid Genetic Algorithm

Research on tribological performance of textured thrust bearing using gray relational degree and improved multi-objective water circulation algorithm

Optimizing the Parameters of the Partial Textures of the Crankpin Bearing to Enhance the Lubrication Performance of an Engine

Influence of surface texture parameters of screw pump rotor on tribological properties of its friction pairs