Abstract:Surface texturing has been shown to reduce friction and improve durability in mechanical face seals and metal forming operations, and lightly loaded thrust bearings. However, the success has been limited to conformal contacts and low load high speed operating conditions, i.e. hydrodynamic lubrication dominated regime. Both experiments and numerical simulations have shown that textural patterns, under higher loading and/or slower speeds may increase friction and even cause the lubrication film collapse. Specific designs of surface texture pattern, as its shape, depth and density, are required for different lubrication regimes. Our own study has shown (Hsu et al 2014 J. Phys. D: Appl. Phys. 47 335307) that large/shallow dimple reduces friction in hydrodynamic lubrication regime, whereas small/deep dimple shows benefit in mixed/boundary lubrication regimes (if the textural designs can provides hydrodynamic/hydrostatic lift forces to reduce the machine loading). In considering an engine component typically experiences duty cycles that may cross various lubrication regimes, a multiscale surface texture design appears attractive. This type of mixed shape texturing combines textures designed for low load, high speed operating conditions and the textures that are designed for high load, low speed operations. In this paper, two types of multiscale surface texture designs are presented. Ball-on-three-flats (BOTF) wear tester (under high loading conditions) is used to evaluate the performance of these multiscale texture designs along with the baselines of un-textured surfaces under the same surface preparation procedures. Two texture designs with only a single shape dimples are included in the study. Results suggest that multiscale surface texture design not only further reduces friction in comparison to the textures with single shape dimples, but also shows the effectiveness across hydrodynamic regimes to the mixed lubrication regimes.

Effect of Compound Texture on Lubrication and Sealing Performance of Plunger Pump

Influence of Microdimple on Lubrication Performance of Textured Plunger Pump

Experimental Analysis On Oil Film Properties Of Plane Port Pair In Axial Piston Machine

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Study on Tribological Properties of Laser-Textured Plunger in Methanol Engine

Experimental Study on Texture Coupling Mechanism and Antifriction Performance of Piston Rod Seal Pair

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

Study on the effects of the textured surface to improve the performance of cylinder block/valve plate interfaces

Effects of Chevron Micro-Textures on Tribological and Lubricating Performance of Cylinder Block/Valve Plate Interface in Axial Piston Pumps

The Mechanism Performance of Improved Oil Pump with Micro-Structured Vanes

Study on the Tribological Properties of Multilayer Concentric Hexagonal Laser Texturing on Rubber Surfaces of Screw Pumps

Synergistic Effect of Elliptic Textures and H-DLC Coatings for Enhancing the Tribological Performance of CuAl10Fe5Ni5 Valve Plate Surfaces

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Multi-objective Optimization of Surface Texture for the Slipper/swash Plate Interface in EHA Pumps

Research on the Profile Design of Surface Texture in Piston Ring of Internal Combustion Engine

Experimental study on the effect of post-injection parameters on performance of extra-high pressure common-rail diesel engine

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

Self-adaptive surface texture design for friction reduction across the lubrication regimes

Tribological behaviors of laser textured surface under different lubrication conditions for rotary compressor

Lubrication Adaptability to the Variations of Combustion Modes by Texturing Cylinder Liner in Engines

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions